Where is the transmission dipstick on a Porsche Cayenne?
Turn the engine off and open the hood of the Porsche Cayenne. Find the transmission dipstick located at the front of the car on the left side of the engine.
How do I check transmission fluid in a Cayenne?
How Do I Check Transmission Fluid in a Cayenne? The Porsche Cayenne is a European luxury SUV that comes with a manual or automatic transmission. Transmissions are made up of several electrical and hydraulic components that are responsible for the revolutions per minute, or RPM, of the wheels in conjunction with the speed changes in the vehicle.
How to service a Porsche Cayenne automatic transmission?
Let the car cool down overnight before starting the transmission service. Be prepared to dispose of the fluid and filter properly due to the hazardous waste implications. Porsche recommends also draining the transmission cooler when servicing the automatic transmission. Consult the factory manual for this additional procedure.
What’s the torque on a Cayenne automatic transmission?
Torque all oil pan fasteners to 90 IN/lbs. Remove the transmission oil inspection plug (24mm x 1.5mm); fill the transmission with fluid until it overflows slightly. This will require a reservoir, fluid pump and hose.
Turn the engine off and open the hood of the Porsche Cayenne. Find the transmission dipstick located at the front of the car on the left side of the engine.
Where can I buy transmission fluid for a Porsche Cayenne?
Purchase the proper transmission fluid for your Cayenne model. You can buy the transmission fluid at Porsche dealerships or have a dealership change the fluid for you. Only touch the transmission dipstick after you open the hood.
Torque all oil pan fasteners to 90 IN/lbs. Remove the transmission oil inspection plug (24mm x 1.5mm); fill the transmission with fluid until it overflows slightly. This will require a reservoir, fluid pump and hose.
What should I do after servicing my Porsche Cayenne?
After the test drive, inspect the transmission carefully for any fluid leaks and reinstall the under-body paneling. Tighten all sheet metal screws by hand and torque the under-body panel bolts to 90 IN/lbs. Porsche also recommends performing a “Transmission Initial Adaptation” after servicing the automatic transmission.