How to upgrade the Porsche Boxster 996 gauge cluster?
One of the neat upgrades that you can perform on your Boxster is to install the Porsche 911 (996) gauge cluster into your dashboard. The 996 cluster has two additional gauges, a voltmeter and an oil pressure gauge that you can hook up and make operational.
Which is gauge pod to use on a 2001 Boxster?
A cluster from a 2001 Carrera is not correct for a 2001 Boxster: use a 2002 or later cluster. Part numbers have changed over the years, but two sample part numbers for this are 996-641-980-20 (manual) or 996-642-980-21 (Tiptronic). Which gauge pod to use?
Do you need a C4 cluster for a Boxster?
For the 1997-00 Boxster, you need to find an instrument cluster from a C2, not a C4. This is because the early C4s have a different gas tank and a different fuel sending system that is not compatible with the Boxster. If you install an early C4 cluster into an early Boxster, then your fuel gauge will not operate properly.
What are the gauges on a Porsche 996?
The 996 cluster has two additional gauges, a voltmeter and an oil pressure gauge that you can hook up and make operational. In addition, the later-style 996 gauges have an improved dot-matrix style screen that is an upgrade from the original style.
One of the neat upgrades that you can perform on your Boxster is to install the Porsche 911 (996) gauge cluster into your dashboard. The 996 cluster has two additional gauges, a voltmeter and an oil pressure gauge that you can hook up and make operational.
Can a gauge cluster be removed from the dash?
The gauge cluster is now ready to be separated from the dash. With a secure grip on the instrument cluster, give it a firm pull towards you. The gauge cluster uses several metal spring clips on its backside to help keep the cluster in place.
How do you remove gauge from Porsche 997?
With the steering wheel now lowered, the lower gauge trim piece is now easily accessible. To free the trim, simply pinch the piece in the center with your fingers, and pull it towards you. The trim is secured by two clips on the backside, which requires a bit of force to free.
A cluster from a 2001 Carrera is not correct for a 2001 Boxster: use a 2002 or later cluster. Part numbers have changed over the years, but two sample part numbers for this are 996-641-980-20 (manual) or 996-642-980-21 (Tiptronic). Which gauge pod to use?
How do you remove the gauge cluster from a Porsche 997?
Underneath the trim panel are two Torx screws that secure the bottom portion of the gauge cluster in place. Remove the two Torx screws, preferably using a magnetic driver to avoid losing the screws. Figure 4. Torx screws removed. The gauge cluster is now ready to be separated from the dash.
What’s the problem with my Porsche Cayman 987?
The early M97 engines fitted to the 987 Cayman can have issues with a bearing at one end of the engine intermediate shaft. The shaft connects the two ends of the engine timing gear. At one end, the shaft drives the oil pump and at the other, finishes in a sealed bearing.
What to do with a removed gauge cluster?
With the instrument cluster removed, do not turn on the ignition or attempt to start the car as an error code will likely be present once the gauge cluster is re-installed. Installation is the reverse of the removal procedure. Plug electrical harness into instrument cluster.