Do you need a scanner for a Porsche airbag light?
To diagnose Porsche airbag light, you will need a scanner that can access the airbag module. Most generic scanners that you buy at auto parts stores don’t work and will not show a fault code stored in the airbag module.
Why is there a warning light on my Porsche?
The passenger sensor itself can fail, which then triggers the airbag warning light on your Porsche dashboard. The sensor may also need to be calibrated from time to time or if the passenger seat is removed.
Where are crash codes stored on a Porsche?
One is that crash codes are stored in the airbag module. Crash data can not be cleared even with a Porsche scanner. They will need to be reset by a specialist that performs Porsche airbag module reset, on eBay or the other option is to replace the airbag module, which is a very expensive repair.
What to do if your airbag light is on?
You will need a Porsche scanner such as iCaroft POR II to read the fault codes from the SRS/ Airbag module and find out why the airbag light is on. Locate the diagnostic port under the dashboard and plugin your Porsche scanner. Turn on the ignition. Allow the scanner to power on. Select your Porsche model from the menu. Select SRS/Airbag module.
Is there a way to reset the Porsche airbag light?
You can only reset the Porsche airbag light if codes are in STORED staus. For example, a fault trigged during a jump start can be cleared. A code that was triggered because you accidentally unplugged an airbag wire can be cleared as long as the wire is reconnected.
Why are there no warning lights on my Porsche?
Switch on lights by light switch if necessary Have the fault remedied at an authorized Porsche dealer. Weight sensing is impaired on the passenger’s seat (Advanced Airbag). Correct the seating position, set the backrest upright, do not support weight on the armrests, or lift on the handles. Airbag faulty.
One is that crash codes are stored in the airbag module. Crash data can not be cleared even with a Porsche scanner. They will need to be reset by a specialist that performs Porsche airbag module reset, on eBay or the other option is to replace the airbag module, which is a very expensive repair.
What to do if your airbag light is not working?
Go back to the main menu ” next select Clear Fault Codes. If the codes do not clear, the codes are in the present status. Fix the problem related to the fault code, then try the reset procedure again. You can only reset the Porsche airbag light if codes are in STORED staus.