Why is the ignition switch stuck on my Cayenne?
The ignition switch on the Porsche Cayenne can be a bit troublesome. Over the years, continual use can wear out the internal components, leading to the key being stuck in the ignition when you try to remove it.
Why is my ignition lock cylinder not working?
The ignition lock cylinder is connected to an electronic ignition switch, they work power on and start the vehicle. If the ignition lock cylinder wear out or breaks, it may prevent the vehicle from starting when the key is inserted and turned. A no start condition can also be caused by a wide variety of other issues,…
How long does it take to replace ignition switch on Porsche Cayenne?
The good news is that replacement is relatively easy and should not take more than an hour. Due to the complexity of the electrical system in the Cayenne, it’s important to check that your battery is in good shape prior to replacing the switch.
Where to disconnect the battery on a Porsche Cayenne?
Disconnecting the battery is a good idea. The disconnect point is located under the driver’s side carpet, near the seat. You’ll see a slit in the carpet, pull it up and you’ll see the 13mm acorn nut holding the ground lead to the frame (green arrow).
The ignition switch on the Porsche Cayenne can be a bit troublesome. Over the years, continual use can wear out the internal components, leading to the key being stuck in the ignition when you try to remove it.
The good news is that replacement is relatively easy and should not take more than an hour. Due to the complexity of the electrical system in the Cayenne, it’s important to check that your battery is in good shape prior to replacing the switch.
Disconnecting the battery is a good idea. The disconnect point is located under the driver’s side carpet, near the seat. You’ll see a slit in the carpet, pull it up and you’ll see the 13mm acorn nut holding the ground lead to the frame (green arrow).
What to do if your ignition key is stuck?
If the key is stuck in the ignition, check that the battery voltage is good. If not, use a battery charger to charge the battery. Once the battery is charged, use a paper clip to press in the tab to the left of the key as shown here (green arrow) until you hear a click.
What happens if you have an incorrect ignition code?
The chip in the key transmits a specific code, of which there are millions. If this code matches the ones programmed into the vehicle, engine starting is enabled. An incorrect key code, such as from an unprogrammed key or damaged key, would prevent engine starting. Code “confusion,” such as having multiple keys can also occur, preventing ignition.
Where is the disconnect point on a Porsche Cayenne?
The disconnect point is located under the driver’s side carpet, near the seat. You’ll see a slit in the carpet, pull it up and you’ll see the 13mm acorn nut holding the ground lead to the frame (green arrow). Remove the nut and pull the lead up off the post.
The disconnect point is located under the driver’s side carpet, near the seat. You’ll see a slit in the carpet, pull it up and you’ll see the 13mm acorn nut holding the ground lead to the frame (green arrow). Remove the nut and pull the lead up off the post.
The chip in the key transmits a specific code, of which there are millions. If this code matches the ones programmed into the vehicle, engine starting is enabled. An incorrect key code, such as from an unprogrammed key or damaged key, would prevent engine starting. Code “confusion,” such as having multiple keys can also occur, preventing ignition.
What causes the ignition lock on a Porsche to fail?
For most Porsche enthusiasts, taking care of your car becomes second-nature, which is why it can be especially concerning when you notice symptoms of malfunction or failure in various parts. One component that can wind up failing in various Porsche models is the ignition lock assembly.
For most Porsche enthusiasts, taking care of your car becomes second-nature, which is why it can be especially concerning when you notice symptoms of malfunction or failure in various parts. One component that can wind up failing in various Porsche models is the ignition lock assembly.
What to do if your ignition switch is bad?
If you have determined that your switch is bad, press the small release mechanism next to the key slot to mechanically release the key from the switch. Once the key is removed, I like to also disconnect the battery prior to removing the switch. This provides a degree of safety when working around the vehicle’s security system.
How do you change the brake light on a Porsche Cayenne?
Squeeze the plastic tabs (green arrows) inward on the electrical connector and pull it out of the brake light switch. Fit the new brake light switch in the hole while the brake pedal is pulled fully back towards the rear. When you install the new switch, this will self-adjust the new switch.
Why is my Porsche key stuck in the ignition?
I called the 800 roadside assistance center and they said that Porsche needs to remove the key and that the key is stuck in the ignition because the battery was completely dead. Thanks. I’ve never heard of a key being stuck in the ignition due to a dead battery. I thought the key insertion/removal was a purely mechanical process.