Where do you put the starter motor on a car?
Place the bolt that holds the starting motor to the bottom of the chassis through the ground wire. Lift the starter motor into place and place the bolt through the hole on the chassis. Place the nut on the bolt and tighten the nut onto the bolt with the socket set and wrench set.
Can you change the starter motor on a 2000 Daewoo?
Changing a starter motor in a 2000 Daewoo can be very tricky. The bolt that holds the top of the starter motor in place is hidden very well. If you do not know where to look for this bolt, changing the starter motor will be extremely frustrating.
How do you remove a brake booster from a car?
Place the socket on the nut and, while holding the bolt in place with the wrench, turn the nut until it comes off of the bolt. Remove the bolt and move the ground cable out of the way. Move to the top of the engine and find the round drum that is the brake booster.
Where is the positive wire on a 2000 GTX starter?
In the center of the starter is where your positive wire from the battery is connected. You need to disconnect that cable. Make sure both battery cables are disconnected before you do this work. After you have everything disconnected, the head of the starter will only have a spindle on it, with splined teeth.
Where are the bolts on a 2000 GTX starter?
On the back of the starter, is a place to remove the long, small bolts. There is 2 of them, they hold the starter together. Do not remove them, unless you understand how to work the brushes, they are spring loaded. In the center of the starter is where your positive wire from the battery is connected. You need to disconnect that cable.
How do you remove the starter motor from a car?
Wiggle the starting motor loose and let it fall. Get back under the car and use the socket and ratchet to remove the power supply line from the top of the starter motor. Remove the starter motor from under the vehicle. Replacing the starter motor.
Changing a starter motor in a 2000 Daewoo can be very tricky. The bolt that holds the top of the starter motor in place is hidden very well. If you do not know where to look for this bolt, changing the starter motor will be extremely frustrating.
Place the socket on the nut and, while holding the bolt in place with the wrench, turn the nut until it comes off of the bolt. Remove the bolt and move the ground cable out of the way. Move to the top of the engine and find the round drum that is the brake booster.