How many volts should a remote wire put out?
12+ volts
While in the ON position, there should be 12+ volts at the remote turn on wire. If you have 12+ volts while the ignition is OFF, the remote turn on wire is connected to constant power.
How does wire size affect voltage drop?
Any length or size of wires will have some resistance, and running a current through this dc resistance will cause the voltage to drop. As the length of the cable increases, so does its resistance and reactance increase in proportion. This condition causes the load to work harder with less voltage pushing the current.
Where to hook up a remote wire?
If you can’t find a remote wire from the HU, You can use a switch. to wire a switch to your amp you need wire the 12+ Connection on your amp to the remote on your amp. If there is a blue wire on your HU Use that as your Remote Wire.
What happens when the remote turn on wire is turned off?
When the ignition of the vehicle is turned off, the remote turn on wire stops transferring voltage and the amplifier turns off. If the remote turn on wire is connected to a wire in the vehicle that has constant voltage, the amplifier will always be on.
Do you need a remote wire for an amp?
the remote wire is for powering on the amp. if you supply it with any 12v+ the amp should work. If you can’t find a remote wire from the HU, You can use a switch. to wire a switch to your amp you need wire the 12+ Connection on your amp to the remote on your amp. If there is a blue wire on your HU Use that as your Remote Wire.
Can a remote turn on wire be connected to a fuse?
Since the remote turn on wire is low current, it can be connected to almost any fused output terminal (such as the one for the radio itself) as long as it only powers up when the vehicle is on. (To make sure you choose a fuse that only receives voltage when the ignition is on, you can test with a multimeter before connecting the wire.)
If you can’t find a remote wire from the HU, You can use a switch. to wire a switch to your amp you need wire the 12+ Connection on your amp to the remote on your amp. If there is a blue wire on your HU Use that as your Remote Wire.
the remote wire is for powering on the amp. if you supply it with any 12v+ the amp should work. If you can’t find a remote wire from the HU, You can use a switch. to wire a switch to your amp you need wire the 12+ Connection on your amp to the remote on your amp. If there is a blue wire on your HU Use that as your Remote Wire.
When the ignition of the vehicle is turned off, the remote turn on wire stops transferring voltage and the amplifier turns off. If the remote turn on wire is connected to a wire in the vehicle that has constant voltage, the amplifier will always be on.
How do you splice a remote turn on wire?
Since the factory wire is already terminated on both ends, splicing into the wire is necessary. Use a T-tap connector or cut the factory wire to splice into the wire by twisting the remote turn on wire together with one end of the factory wire, then crimp on a butt connector.