What are the letters on an EGR valve?
Most of the EGR valves will have the letters A thru’ E molded onto the EGR valve’s connector. I’ll be using these same letters for the circuit descriptions below: Ground circuit for EGR valve solenoid. Gray with Black stripe wire. EGR valve pintle position sensor Ground (provided by the PCM). Black wire. EGR pintle position signal circuit.
When did GM start using the EGR valve?
The EGR valve that’s covered by this article are for 3.1L, 3.4L, and 3.5L GM vehicles from 2000 to 2009 models years (although some late 1999 models use this type of EGR valve too). To make sure this tutorial applies to your specific vehicle, check this section out first: Identifying The EGR Valve.
How does the EGR work in a car?
The EGR valve recirculates burned exhaust emissions back into the intake system so the emissions can be re-burned, or “recycled,” out the exhaust. The system operates by the opening and closing of solenoid valves, regulated by a diaphragm.
Where does the EGR valve go on a Honda Accord?
It bolts with a 10mm to the end of the upper manifold cover. There is a hose going to the PCV valve on the front valve cover and another to the manifold itself. Move it off to the side. 7) Remove the EGR valve. This mounts on the right rear end of the upper intake manifold by two bolts. There is a gasket.
The EGR valve that’s covered by this article are for 3.1L, 3.4L, and 3.5L GM vehicles from 2000 to 2009 models years (although some late 1999 models use this type of EGR valve too). To make sure this tutorial applies to your specific vehicle, check this section out first: Identifying The EGR Valve.
Most of the EGR valves will have the letters A thru’ E molded onto the EGR valve’s connector. I’ll be using these same letters for the circuit descriptions below: Ground circuit for EGR valve solenoid. Gray with Black stripe wire. EGR valve pintle position sensor Ground (provided by the PCM). Black wire. EGR pintle position signal circuit.
What happens if you have a bad EGR valve?
When the valve is opened, exhaust gases are allowed through the vehicle’s EGR system to help control vehicle emissions. When the EGR valve has an issue, it can cause problems with the flow and operation of the EGR system, which can lead to increased emissions and performance issues. Usually, a bad or failing EGR valve will produce any these 4…
How does an exhaust gas recirculation ( EGR ) valve work?
The EGR (Exhaust Gas Recirculation) valve helps lower the car’s exhaust emissions (gases from the tailpipe). It recirculates the portion of the gasses coming out of the engine by putting in back into the intake manifold, where the engine can burn it again, thereby reducing the emissions. The EGR