What engine was in a 1963 Pontiac Catalina?
Pontiac Catalina, 1963 MY 2369 Its 6.4 litre engine is a naturally aspirated, overhead valve, 8 cylinder unit that produces 215 bhp (218 PS/160 kW) of power at 3600 rpm, and maximum torque of 534 N·m (394 lb·ft/54.5 kgm) at 2000 rpm.
Where are the exhaust pipes on a 1963 Pontiac Catalina?
Streamlined exhaust manifolds are used on the 421 HO, as opposed to the log-type on the 389 and 421 A. The dual exhaust features 2.25-inch head pipes, reverse-flow mufflers and 2.00-inch tailpipes. Under the production engine number, found on the front passenger side of the block below the cylinder head deck, is the engine code.
What was the gear ratio on a 1963 Pontiac Catalina?
The standard rear gear ratios for Catalina were: 303-hp 389 = 2.69:1 with the Roto Hydra-Matic and 3.42:1 with the manual; 313-hp 389 Tri-Power = 3.08:1 with the Roto Hydra-Matic and 3.42:1 with the manual; 421 HO = 3.42:1 all.
What kind of V8 did the Pontiac Catalina have?
All Pontiacs were powered by various renditions of the new 389 cubic-inch Tempest V8 (which was later renamed from 1961 as the Trophy V-8 ), which was basically a version of the previous 370 cubic-inch V8 with stroke increased to 3.75 inches (the 370ci was used in 1958-model Pontiacs and based on the Pontiac V8 design introduced in 1955).
What kind of engine does a Pontiac 389 have?
The 389 runs the “472” cam, the 320-hp 421 the “009” cam and the 421 HOs the “543” cam. While intake and exhaust lift figures are in the very low .400-inch range for all of them, they do vary in advertised duration.
What kind of engine does a 1962 Pontiac Catalina have?
1962 Pontiac Catalina, 455, 400 Automatic, PS, PB, Eight Lug Wheels, Headers, Mini High Torque St *1963 PONTIAC CATALINA*UPGRADED 428 ENGINE*ALUMINUM TRI-POWER INTAKE AND CARBS*4 SPEED MANUAL TRANS 1963 Pontiac Catalina. Likely one of the most pristine examples of a driven non-restored original 1
Streamlined exhaust manifolds are used on the 421 HO, as opposed to the log-type on the 389 and 421 A. The dual exhaust features 2.25-inch head pipes, reverse-flow mufflers and 2.00-inch tailpipes. Under the production engine number, found on the front passenger side of the block below the cylinder head deck, is the engine code.
What was the sales of the 1963 Pontiac Catalina?
Each of these styling cues would be employed on various other brands in the years that followed. Bold styling, performance options and enticing pricing propelled Pontiac’s 1963 Catalina two-door hardtop sales to 60,795 units, versus 46,024 in ’62.
What kind of steel is a Pontiac Catalina made of?
The crank is Arma-Steel and while the rods in the 389 are cast Arma-Steel, those in the 421 are forged steel. Pistons are flat-tops with valve reliefs and are made from aluminum alloy. The compression ratio is 10.25:1 in the 389s and 421 A, and 10.75:1 in the 421 HOs.