Why is my EGR tube not working properly?
The exhaust flowing through it can leave behind residue that builds up in the tube. The high heat of these gasses may also damage the tube, causing leaks. In either case, the result will be that the EGR system doesn’t supply exhaust gasses to the engine when it’s supposed to.
Do you need to replace the EGR pipe?
Even though the functioning of the EGR system may seem complicated, replacing the EGR pipe won’t be. You may need to remove various air intake parts to get at the EGR hose Then you’ll need to unbolt the EGR tube from the exhaust manifold and separate it from the EGR valve, unbolting it and disconnecting the associated vacuum hoses.
Where is the EGR valve on a Hyundai Santa Fe?
Answer: You will find the EGR valve for the 2011 Hyundai Santa Fe by facing the engine, on the right side of the engine, look towards the back of the engine, very near the firewall. Question: Where is the EGR valve on a 2007 Silverado K1500 5.3 liter engine? Answer: On top of the engine just in front of the carburetor.
How do you find the EGR valve in an engine?
Remove the vacuum hoses from the valve and inspect the lines. Spray carburetor cleaner inside the lines. Clean out the lines using a pipe cleaner if needed. If there are bolts attaching the valve to the engine, remove them. If the mounting gasket is in good shape you can set it aside and reuse it.
Where is the EGR valve on a 3.6 Cadillac?
The hose for the EGR valve connects to the engine just below the upper, large, radiator hose. The EGR hose is smaller than the radiator hose and easy to spot. Follow the hose back on the side of the engine and you will find the EGR valve. Where is the E.G.R. valve on a 3.6 Cadillac?
Even though the functioning of the EGR system may seem complicated, replacing the EGR pipe won’t be. You may need to remove various air intake parts to get at the EGR hose Then you’ll need to unbolt the EGR tube from the exhaust manifold and separate it from the EGR valve, unbolting it and disconnecting the associated vacuum hoses.
Answer: You will find the EGR valve for the 2011 Hyundai Santa Fe by facing the engine, on the right side of the engine, look towards the back of the engine, very near the firewall. Question: Where is the EGR valve on a 2007 Silverado K1500 5.3 liter engine? Answer: On top of the engine just in front of the carburetor.
How does the EGR tube work in a car?
The EGR tube acts as the main passageway of the EGR system, directing the exhaust gasses produced by the engine’s combustion from the exhaust manifold through the system, eventually recirculating it back into the intake manifold and back into the combustion chambers and the air-fuel mix to be burned again.