Is the Pontiac Solstice still a good car?
The Solstice wasn’t enough to save Pontiac, but it’s still a car worth savoring. Whether you have a convertible or the 2009-only targa-topped coupe, you’ve already got a fun, flashy little runabout that’s a blast to drive on a sunny day.
How do you change the radio in a Pontiac Solstice?
Starting at rear of the center console trim panel, pry out around the console/receiver trim panel to release the retaining clips. Disconnect the harnesses and remove the receiver trim panel to expose the radio and the four 7mm screws that secure it in the dash. Remove those, then disconnect the harnesses and remove the radio.
Where is the steering wheel on a Pontiac Solstice?
It’s relatively easy to retain the steering wheel audio controls when you install a new stereo in your Solstice. When you enter your vehicle information, our database will choose the adapter you need to make your factory steering wheel controls work with your new receiver. The Solstice has speakers in the front pillars, doors, rear side panels.
What kind of speakers are in a Pontiac Solstice?
You can also use hot glue or silicone. The door speakers are 6-3/4″ models, and they’re not too hard to replace (Crutchfield Research Photo) The stock speakers are 6-3/4″, 2-ohm models that can be replaced by a variety of 6-1/2″ or 5-1/4″ or 6-3/4″ aftermarket speakers.
What kind of car is the Pontiac Solstice?
Sometimes, they actually build the thing. And sometimes, as in the case of the Pontiac Solstice, the production car is every bit as neat as the hand-built show car that inspired it. This small, sporty two-seater combined a reasonable price point with great looks, taut handling, and, with the optional turbocharged engine, a useful amount of power.
Starting at rear of the center console trim panel, pry out around the console/receiver trim panel to release the retaining clips. Disconnect the harnesses and remove the receiver trim panel to expose the radio and the four 7mm screws that secure it in the dash. Remove those, then disconnect the harnesses and remove the radio.
What kind of speakers do I need for my solstice?
If you replace the 2-ohm factory speakers with standard 4-ohm aftermarket speakers, you’ll hear a noticeable drop in volume. Instead, make sure your new speakers also have a low impendance rating of either 2 or 3 ohms. Tools Required: Panel tool, small flat blade screwdriver, needle-nose pliers, 7mm driver, Phillips screwdriver