How do you test a GM fuel pump?

GM has made it super easy for you and me to test the fuel pump (with a fuel pressure gauge), since they have installed a fitting (called the Schrader valve) on the fuel pressure regulator to which you and I can connect the fuel pressure gauge to (see photo above).

What are the symptoms of a bad fuel pump?

Symptoms Of A Bad Fuel Pump. Which And Where To Buy A Fuel Pressure Gauge. FUEL PUMP TEST 1: Fuel Pressure Test With Gauge. FUEL PUMP TEST 2: Using Starting Fluid. More 3.8L V6 GM Tutorials. You can find this tutorial in Spanish here: Cómo Probar La Bomba de Combustible (GM 3.8L) (at: autotecnico-online.com ).

What does 0 psi mean on fuel pump?

The fuel pressure gauge will register 0 PSI. OK, let’s analyze your test results: CASE 1: If the fuel pressure gauge registered 0 PSI. This confirms that the cause of your 3.8L equipped GM car or mini-van is caused by a lack of fuel.

When to do a fuel pressure test on your car?

If your car is idling or running weird (high idle, low idle, hard to accelerate, studdering, hard to start) then this is one of the first tests you should do. Diagnose high fuel pressure, low fuel pressure, a broken check valve in the fuel pump, broken fuel pressure regulator, or leaking injectors.

How to check fuel pressure on a Pontiac Grand?

Attach the vacuum hose to the port on the fuel pressure regulator. Plug in the electrical connection for the fuel pump near the fuel tank on 2.4-liter models. On 2.2-liter and V-6 models, replace the cap on the end of the fuel rail.

How do you test a bad fuel pump?

Removing the fuel line that connects to the fuel injector rail (this is the one that delivers fuel from the fuel filter) and place it in a container. When ready, have your helper bump the starter motor while you verify if fuel comes out or not. No fuel coming out of the fuel line further confirms a bad fuel pump.

How to test the fuel pump in a mini van?

This is due to the fact that GM has included a Schrader valve on the fuel rail to which you and I can attach a fuel pressure gauge to. Using a fuel pressure gauge to make sure that enough fuel is reaching the fuel injectors is the most accurate way to diagnose the fuel pump in your car or mini-van.

CASE 1: If the fuel pressure gauge registered 0 PSI. This confirms that the cause of your Venture’s (Malibu, Impala, Lumina, Grand Am, Cutlass Supreme, etc.) is caused by a lack of fuel.

How do you remove an old fuel pump?

Well enough was enough. I removed the old pump which also includes the tank fuel gage gizmo. Threw the pump away and secured a steel rod with cable ties to hold the pipe on the bottom of the pump. Inserted the pump-free sender unit.

Why is my GM 3.8L fuel pump not working?

CASE 2: If the fuel pressure gauge registered 35 PSI. This fuel pressure gauge result lets you know that the fuel pump is working and delivering enough fuel to the fuel injectors. The reason your 3.8L GM vehicle is not starting is due to another reason.

What happens if your fuel pump is failing?

The fuel pump feeds fuel to the engine at a reliable rate; without this pump, your fuel would just sit in your tank, useless and inert. If you’re attentive, you can catch the symptoms of a failing fuel pump and have it repaired or replaced before it leaves you stranded on the side of the road.

When is it time to replace your fuel pump?

Like any device, however, fuel pumps can and do eventually wear out after thousands of miles of use. If your car struggles with weak or inconsistent power, it may be time to replace the fuel pump on your car. Have you ever had to deal with a failing fuel pump?

Where is the fuel pump in a car?

Electronic pumps are typically located inside of the fuel tank and use electromagnetic motors to force fuel to the engine at high pressure. Mechanical pumps are usually found in cars that use carburetors, and electronic pumps are usually used with fuel injection systems.

What kind of fuel pump do you use?

Mechanical pumps are usually found in cars that use carburetors, and electronic pumps are usually used with fuel injection systems. Since mechanical pumps are driven directly by the motion of the engine and contain few moving parts, they tend to be reliable and relatively easy to diagnose and fix.

How much does a GM fuel pump cost?

As mentioned earlier (in fuel pump test 2), in all of the GM 3.1L and 3.4L V6 equipped vehicles GM was kind enough to put a Schrader valve on the fuel injector rail where you can tap into the fuel system and check its performance. A fuel pressure gauge can cost you as little as $40 (US) or as much as $200 (US).

What is the factory resistance of a GM fuel pump?

Most GM vehicle have a factory spec resistance of 40 Ω empty & 250 Ω full. If you are having trouble figuring out the factory spec resistance for your vehicle, then please contact us via email – [email protected] or telephone – 305-232-3433. Thanks

Why is my GM 3.1L fuel pump not working?

CASE 2: If the fuel pressure gauge registered 35 PSI. This fuel pressure gauge result lets you know that the fuel pump is working and delivering enough fuel to the fuel injectors. The reason your 3.1L or 3.4L GM vehicle is not starting is due to another reason.

How to diagnose a faulty fuel pump failure?

In this video we go over the basic steps of diagnosing a faulty fuel pump. So if your vehicle isn’t starting and you suspect a fuel pump problem, here are some steps to follow to confirm your suspicions. Another ‘quick’ test is to bang on the fuel tank and then try and start the engine.

How much does a GM 3.8L fuel pump cost?

As mentioned earlier (in fuel pump TEST 2), in all of the GM 3.8L V6 equipped vehicles, GM was kind enough to put a Schrader valve on the fuel injector rail where you can tap into the fuel system and check its performance. A fuel pressure gauge can cost you as little as $40 (US) or as much as $200 (US).

Navigation