Can I drive my car with a cracked radiator?
A cracked radiator can be dangerous to drive with because the engine may overheat. A cracked radiator does not allow the proper amount of coolant to reach the engine, which causes the overheating. Contact the professionals at YourMechanic to make the correct diagnosis and to repair the radiator properly.
Can you replace the radiator on a Pontiac Grand Prix?
If you have a Pontiac Grand Prix, replacing the radiator is a fairly difficult project because you must remove so many engine components before you can replace the radiator. However, if you have mechanical know how, you may want to tackle the job.
Can you replace the radiator on a 2001 Grand Am?
Although the process is essentially the same for any year or model, here’s how to replace the radiator in the popular 2001 Grand Am. Park the car on a level surface and be sure the ignition is in the “Off” or “Lock” position.
Why is the radiator so hard to fill in a Pontiac Grand Am?
Filling the radiator in your V-6 Pontiac Grand Am can be a challenge. The reason it is so difficult centers around the fact that the radiator is lower in the vehicle than some of the cooling system components. As a result, air pockets form in the water pump housing and thermostat housing.
How do you install a new radiator in a car?
Install the new radiator, and tighten the fasteners and clips securely. Reattach the transmission cooler lines, radiator hoses, and the fan and fan shroud. Reconnect the negative battery cable. Fill the radiator with a mixture of half distilled water and half engine coolant.
Is it necessary to replace radiator on Pontiac Grand Am?
It’s essential to keep the radiator on your Pontiac Grand Am in good condition, as a leaky radiator can cause overheating and engine damage. Although the process is essentially the same for any year or model, here’s how to replace the radiator in the popular 2001 Grand Am.
How do you drain a Grand Am radiator?
Disconnect the negative battery cable. Disconnect the lower radiator hose and drain the radiator into a resealable container. Disconnect the fan and the fan shroud, if equipped on your Grand Am. Remove the remaining radiator hoses.
Install the new radiator, and tighten the fasteners and clips securely. Reattach the transmission cooler lines, radiator hoses, and the fan and fan shroud. Reconnect the negative battery cable. Fill the radiator with a mixture of half distilled water and half engine coolant.