What to do if your alternator is loose on a Dodge?
Locate the alternator. Depending on your model of Dodge, the location will vary. It will, though, have a belt running to it. Check this belt to make sure it is tight. If the belt is loose, you can try tightening it by adjusting the alternator on its mounting bracket. You will need a wrench or socket set to accomplish this.
What do you need to change an alternator?
Remove the main power cable from the alternator. The main power cable will be the thick cable attached to the alternator that runs from the battery. Depending on how much space you have in your specific vehicle, you may be able to use a ratchet, but in some, you may only be able to fit an open-ended wrench.
Do you need to remove serpentine belt to change alternator?
As you loosen the bolts, the alternator will slide in the bracket under the tension of the belt. You may not need to remove the serpentine or accessory belt if it’s not damaged.
How can I tell if my alternator has an auto tensioner?
You can tell if your vehicle uses an auto-tensioner by looking at the alternator mounting bracket: if the bolts can slide from side to side in the bracket, it does not have an auto-tensioner. You will need to slide the belt off the alternator pulley before you release the auto-tensioner.
How to replace an alternator on a 1995 GMC?
Somewhere on your vehicle there is a tensioner pulley. You’ll need to move it enough to slip the belt off the pulley. Our ’95 GMC has a standard spring-loaded GM tensioner that required us to pull it back with a wrench.
How can I upgrade my alternator to single wire?
To upgrade from a three-wire externally-regulated alternator to a single-wire internally-regulated unit, you first need to procure one that’ll fit the bracket on your engine and have the pulley align correctly with the other accessories that run off the same belt. There are two ways to do this.
As you loosen the bolts, the alternator will slide in the bracket under the tension of the belt. You may not need to remove the serpentine or accessory belt if it’s not damaged.
How can I tell if I need to replace my alternator?
Inspect the serpentine belt for damage. Look for signs of glossing or glazing (shinier portions) on the edges and underside of the belt. Inspect both the top and underside for signs of cracking as well. If you find any of those issues, you’ll need to replace it. Remove the alternator from the engine bay.
Locate the alternator. Depending on your model of Dodge, the location will vary. It will, though, have a belt running to it. Check this belt to make sure it is tight. If the belt is loose, you can try tightening it by adjusting the alternator on its mounting bracket. You will need a wrench or socket set to accomplish this.
When does the Check Engine light turn on?
The orange, engine-shaped icon on your car dashboard’s instrument cluster is programmed to turn on when the vehicle’s electronic brain detects something is wrong.
Can a check engine light get clogged up?
The EGR valve can get clogged up or fail entirely. If you’re even slightly mechanically inclined, you can remove the valve, clean it up, and reinstall it in a relatively short amount of time. If the valve needs to be replaced, expect to pay at least $125 for a brand-new, OEM-quality unit.
Why is my Check Engine light on in my Bugatti Chiron?
The monstrous Bugatti Chiron has 16. No matter how many you have though, a malfunctioning coil will almost certainly trigger the check engine light, but remember, if your car burns diesel, you have neither ignition coils nor spark plugs.