What kind of engine does a Pontiac Montana have?
In the United States and Mexico only the long-wheelbase version was sold. In Mexico, the Montana continued until the 2009 model year, with the 3.9 L V6 as the only engine option. General Motors marketed it as the Pontiac Montana SV6, and it was almost identical to the discontinued North American version,…
When did Pontiac stop making the Montana minivan?
When the van was redesigned for 2005, the name was changed to Montana SV6. It was discontinued after the 2006 model year in the United States because of slow sales, but continued to be sold in Canada and Mexico until 2009. Since their introduction, the Pontiac minivans were GM’s most popular minivans among consumers in Canada.
What kind of steering wheel does a Pontiac Montana have?
The Pontiac Montana came in both short- and long-wheelbase models. The Pontiac Montana was one of the few minivans which provided seating for eight. For 2001, the Montana received a new steering wheel with the Pontiac logo which replaces the one with the PONTIAC letters.
How is the Pontiac Montana related to the Trans Sport?
GM dropped the Trans Sport name for MY1999 (2000 in Canada) and the van simply became Montana. This generation was related to the previous generation Buick GL8, the Chevrolet Venture, the Oldsmobile Silhouette, the Vauxhall Sintra, and the Opel Sintra.
What kind of equipment does a Montana SV6 have?
The Pontiac Montana SV6 minivan was sold for 2005 and 2006 only. Standard equipment included air-conditioning, an eight-speaker CD/MP3 sound system, rear-seat DVD entertainment and OnStar telematics. An options package added a passenger-side power sliding door, power driver seat, sport suspension and rear air-conditioning.
When did the Pontiac Montana SV6 come out?
In sum, the Pontiac Montana SV6 was pretty much an ordinary minivan with beefed-up styling and acceptable levels of content and capability. But it still couldn’t match the driving competence, safety features or popular conveniences of the day’s top minivans. The Pontiac Montana SV6 minivan was sold for 2005 and 2006 only.
Where is the fuse box on a Pontiac Montana SV6?
Here you will find fuse box diagrams of Pontiac Montana SV6 2005, 2006, 2007, 2008 and 2009, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay. The fuse box is located on the right side of the dashboard behind the cover. How to check the fuses?
What kind of equipment does a Pontiac Montana have?
Standard equipment included air-conditioning, an eight-speaker CD/MP3 sound system, rear-seat DVD entertainment and OnStar telematics. An options package added a passenger-side power sliding door, power driver seat, sport suspension and rear air-conditioning.
What was the name of the Pontiac Montana in 1999?
GM dropped the Trans Sport name for MY 1999 (2000 in Canada) and the van simply became Montana. This generation was related to the previous generation Buick GL8, the Chevrolet Venture, the Oldsmobile Silhouette, the Vauxhall Sintra, and the Opel Sintra.
When did the Pontiac Montana Thunder come out?
The Montana Thunder was produced in 2002 and 2003, but for 2004 it was made an optional package on Montana GTs called the “Chrome-Sport” package. Only the “Thunder” badges were discontinued. Despite the Pontiac Montana’s redesign in 2004, Pontiac continued to sell the original body style for the 2004 model year for fleet use.
What was the rating of the 1997 Pontiac Montana?
A crash test video of the 1997 Trans Sport/Montana resulted in some criticism due to extreme damage to the vehicle in the 40 mph (64 km/h) crash test. The minivan received a “Poor” rating by the Insurance Institute for Highway Safety (IIHS).
When did the Pontiac Trans Sport get the name Montana?
In 1997, the Trans Sport added the Montana moniker as part of an available trim package. The package proved so popular the line was renamed Montana in 1998 for the US and 1999 for Canada. For 2005, the van was redesigned with a higher, less aerodynamic nose to resemble an SUV.
In this article, we consider the second-generation Pontiac Montana, produced from 2004 to 2009. Here you will find fuse box diagrams of Pontiac Montana SV6 2005, 2006, 2007, 2008 and 2009, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.
In the United States and Mexico only the long-wheelbase version was sold. In Mexico, the Montana continued until the 2009 model year, with the 3.9 L V6 as the only engine option. General Motors marketed it as the Pontiac Montana SV6, and it was almost identical to the discontinued North American version,…
When the van was redesigned for 2005, the name was changed to Montana SV6. It was discontinued after the 2006 model year in the United States because of slow sales, but continued to be sold in Canada and Mexico until 2009. Since their introduction, the Pontiac minivans were GM’s most popular minivans among consumers in Canada.
What are the transmission problems on a Pontiac Montana?
Code indicated pressure control solenoid. Service mgr. indicated past experience was that solenoid sheds fragments that contaminate valve body. Engine/transmission must be suspended to remove cover and valve body for removal and cleaning. $100.00+ in parts but a ton in labor.
GM dropped the Trans Sport name for MY 1999 (2000 in Canada) and the van simply became Montana. This generation was related to the previous generation Buick GL8, the Chevrolet Venture, the Oldsmobile Silhouette, the Vauxhall Sintra, and the Opel Sintra.
GM dropped the Trans Sport name for MY1999 (2000 in Canada) and the van simply became Montana. This generation was related to the previous generation Buick GL8, the Chevrolet Venture, the Oldsmobile Silhouette, the Vauxhall Sintra, and the Opel Sintra.
Who is the owner of the 2006 Montana SV6?
2006 Pontiac Montana SV6 Owner ManualM GENERAL MOTORS, GM, the GM Emblem, PONTIAC, the PONTIAC Emblem, and the name MONTANA are registered trademarks; and the name SV6 is a trademark of General Motors Corporation. This manual includes the latest information at the time it was printed.
How do you adjust the reclining seat on a Pontiac Montana SV6?
Reclining Seatbacks To adjust a seatback, pull up on the lever located on the outboard side of the driver’s or front passenger’s seats. Release the lever to lock the seatback where you want it. Push and pull on the seat to make sure it is locked into position.
Is the Pontiac Montana SV6 a registered trademark?
GENERAL MOTORS, GM, the GM Emblem, PONTIAC, the PONTIAC Emblem, and the name MONTANA are registered trademarks; and the name SV6 is a trademark of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further notice.
General Motors deployed the 3.4 liter engine in many of its U.S. built cars. Cars in the Pontiac line that used the 3.4L engine included the Pontiac Montana, Aztec, and Grand Am. Owners of Pontiacs with these engines reported on websites such as Car Complaints.com that they experienced coolant leaks and overheating problems with these engines.
What kind of engine does a GM 3400 have?
See procedure below for 3.1L and 3.4L in many Chevy, Buick, Pontiac and Oldsmobile models. Malibu, Classic, Lumina, Alero, Regal, Century, Grand Prix, Grand Am, Montana, Transport, Venture van, Silhouette, etc. 1999 Pontiac 3.4 V6 3400.
When did the Pontiac Montana nameplate come out?
First generation (1997–2004) The Montana nameplate was used as a trim level of the Pontiac Trans Sport van from 1996 to 1998.
General Motors deployed the 3.4 liter engine in many of its U.S. built cars. Cars in the Pontiac line that used the 3.4L engine included the Pontiac Montana, Aztec, and Grand Am. Owners of Pontiacs with these engines reported on websites such as Car Complaints.com that they experienced coolant leaks and overheating problems with these engines.
See procedure below for 3.1L and 3.4L in many Chevy, Buick, Pontiac and Oldsmobile models. Malibu, Classic, Lumina, Alero, Regal, Century, Grand Prix, Grand Am, Montana, Transport, Venture van, Silhouette, etc. 1999 Pontiac 3.4 V6 3400.
When did the Pontiac 3.4 liter V6 come out?
General Motors, the parent company of Pontiac, began producing members of this family in 1980. GM first manufactured the 3.4-Liter V6 in 1993 and placed it in passenger cars like the Chevrolet Camaro, Pontiac Firebird and Pontiac Aztek.
First generation (1997–2004) The Montana nameplate was used as a trim level of the Pontiac Trans Sport van from 1996 to 1998.
The Montana Thunder was produced in 2002 and 2003, but for 2004 it was made an optional package on Montana GTs called the “Chrome-Sport” package. Only the “Thunder” badges were discontinued. Despite the Pontiac Montana’s redesign in 2004, Pontiac continued to sell the original body style for the 2004 model year for fleet use.
Why is my Montana engine cranking but not starting?
There are a lot of issues that can cause your Montana to crank, but not start. The engine needs air, fuel, and a spark in order to run. It is highly likely that if the engine is cranking, but not starting that it has thrown an OBDII code.
2006 Pontiac Montana SV6 Owner ManualM GENERAL MOTORS, GM, the GM Emblem, PONTIAC, the PONTIAC Emblem, and the name MONTANA are registered trademarks; and the name SV6 is a trademark of General Motors Corporation. This manual includes the latest information at the time it was printed.
When did the Pontiac 3.4 liter engine come out?
The 3.4-Liter engine is a member of GM’s 60-degree V6 engine family. General Motors, the parent company of Pontiac, began producing members of this family in 1980.
How much torque does a 3.4 liter V6 have?
GM first manufactured the 3.4-Liter V6 in 1993 and placed it in passenger cars like the Chevrolet Camaro, Pontiac Firebird and Pontiac Aztek. In the 3.4-Liter V6, the front A/C compressor mounting bolts require 36 foot-pounds of torque to join to the engine block, and the rear ones require 19 foot-pounds.
How much torque does the crankshaft have in a Pontiac?
The crankshaft-to-engine-block bolts receive 37 foot-pounds of torque in two steps. The crankshaft position sensor attaches to the engine block with 8 foot-pounds of torque.
Is the Buick GL8 the same as the Pontiac Montana?
Chevrolet also introduced a nearly identical twin to Pontiac save for its badging for European consumption, named the Chevrolet Trans Sport. Both of the Buick GL8 minivans were only sold in China. The 2000-2005 GL8 is a similar version of the first-generation Pontiac Montana, and the 2005+ GL8 is similar to the Pontiac Montana SV6.
What is the crank sensor on a GM 3.1L engine?
This article will help you test the ignition control module (ICM) and 3X crankshaft position sensor on all of the GM 3.1L and 3.4L overhead valve engines (the 3X crank sensor is also known as the 7X Crank Sensor).
Where to find GM 3.1L, 3.4L test articles?
To see the complete list of 3.1L, 3.4L test articles, go to the GM 3.1L, 3.4L Index Of Articles. You can find this tutorial in Spanish here: Cómo Probar El Módulo de Encendido y Sensor del Cigüeñal (GM 3.1L, 3.4L) (at: autotecnico-online.com ).
What causes a Pontiac 3400 engine to leak?
The intake manifold gasket failed on many 3.4 L engines and caused either an internal or external leak. An internal leak will allow the oil and the coolant to mix together. An external leak allows the coolant to leak outside of the engine. The leaks occur around the intake manifold gasket. The failures are linked to DexCool, GM’s long-life coolant.
What should I do about my Pontiac Montana?
Hi the mechanic obviasly check the coolant level, that being ok. I would replace the thermostat. If your in a cold climate you can also block part the the rad, BUT YOU MUST HAVE A GAUGE TO KEEP AN EYE ON ENGINE TEMPERATURE!
Why does my 2000 Montana overheat all the time?
We have a 2000 Montana and have the same thing with the temp gauge. It usually is caused by a slow leaking lower intake manifold. Common in GM 3.1 and 3.4 V6’s Just keep a check on the coolant level. My husband and I have the same problem but ours eventually overheated on the interstate one evening.
What was the Pontiac Montana mini van problem?
I have used less energy in a weight session, it was so bad. We own a 2001 Pontiac Montana mini van. We took the van in to have a/c checked as it was only blowing out warm air. The dealership said it was a condenser problem and would cost about $800 to fix. My parents also have the same year montana and their condenser also went in their van.
What kind of cylinder head do I need for a Pontiac?
We stock a wide assortment of factory Pontiac heads to modify to suit your needs. Call for specific requests or to verify inventory. Cylinder heads are the most critical components of your engine, when it comes to how much power your engine can produce.
How tall is the wheelbase of a Pontiac Montana?
First generation Wheelbase SWB: 112.0 in (2,845 mm) LWB: 120.0 in ( Length SWB: 187.3 in (4,757 mm) 1999–2000 & 200 Width 1999–2000 & 2003–05: 72.7 in (1,847 mm) Height LWB: 68.1 in (1,730 mm) SWB: 67.4 in (1,
How tall is the intake port on a Pontiac head?
PONTIAC HEAD CHART CASTING NUMBER YEAR & FACTORY APPLICATION CHAMBER VOL# CC’S EXHAUST PORT NOTEWORTHY ATTRIBUTES 47 68 & 69 350 AUTO TRANS 72 D-Port 1.96/1.66 48 69 RA3 400, 350 HO 68 D-Port 722 69 RA4 GTO FBIRD 72 ROUND TALL INTAKE PORT 12 70 400 RA GTO FBIRD 72 D-Port
How big are the cylinders on a Pontiac V8?
1973/74 Stampings on Head codes – 4X, 46, 4C, 16/X Stamped ID Head # Code MVMA Chamber Vol. Valve Diameter CID 1 / 1H 4X 112.30 cc’s 2.11/1.66 valve 455 2H 46 96.17 cc’s 1.96/1.66 valve 350 3 / 3H 4X 98.21 cc’s 2.11/1.66 valve 400 4 / 4H 4X 98.94 cc’s 1.96/1.66 valve 350/400
What kind of head does a Pontiac head have?
PONTIAC HEAD CHART CASTING NUMBER YEAR & FACTORY APPLICATION CHAMBER VOL# CC’S NOTEWORTHY ATTRIBUTES 528511 1958 370 62 1.88/1.6 55-60 INT MAN 538177 61-62 389 62 1.88/1.6 61-64 INT MAN 543797 63 389 62 1.88/1.60 9770716 63 421 HO,64 GTO 65 1.92/1.66
What do the numbers mean on a Pontiac cylinder head?
** Use sheet stainless steel block off plate. In 1973 Pontiac started stamping extra numbers (1/4″ tall) on their heads.These head numbers represented chamber sizes.They are usually stamped on the machined pads by the valve covers. *All rocker arms are threaded beginning with Motor Unit Number 709986 assembled on or about May 7, 1973. 1957-1958
How do you replace an upper intake gasket?
Plug in the harness into the fuel injectors and coolant temperature sensor. Place new upper intake manifold gaskets into place. Put a new gasket on the EGR tube where it meets the upper intake manifold. Reinstall the upper intake manifold. Reinstall the EGR valve. Reinstall the map sensor and bracket.
What kind of gasket to use for air intake?
The original engineering design used a black nylon frame to position silicone gaskets, sealing the air intake passages and coolant passages to the cylinder head. The black nylon cracks and fails over time, allowing the silicone o-rings to shift and leaks to develop.
How do you remove an upper intake manifold?
Remove the 13 mm studs and 10 mm bolts retaining the upper intake manifold. Lift the back end of the intake manifold closest to the power steering pump like a hinge to provide access to the 3/8-inch cooling lines under the throttle bore. Loosen the clamps on the coolant lines and remove the upper intake manifold from the vehicle.
How to replace a 3.4L intake gasket on a car?
Pry on the fuel rail gently with a flat head screwdriver to remove the fuel rail and injectors from the vehicle. Remove the clamps from the coolant bypass hose. Remove the water pump bypass tubes retaining nut by the oil dipstick tube. Remove the 8 mm bolt retaining the bypass tube on top of the water pump housing.
The original engineering design used a black nylon frame to position silicone gaskets, sealing the air intake passages and coolant passages to the cylinder head. The black nylon cracks and fails over time, allowing the silicone o-rings to shift and leaks to develop.
Why does my car not start after an intake gasket repair?
Unplugged sensors are the most common cause of the vehicle failing to start after intake gasket repairs. Keep the valve push rods in proper order. Reversing an intake and exhaust push rods will severely damage the valve train and require cylinder head removal to repair.
Remove the 13 mm studs and 10 mm bolts retaining the upper intake manifold. Lift the back end of the intake manifold closest to the power steering pump like a hinge to provide access to the 3/8-inch cooling lines under the throttle bore. Loosen the clamps on the coolant lines and remove the upper intake manifold from the vehicle.
What causes an oil leak in a Pontiac Montana?
Oil leaks in the 2006 Montanas with the 3.9 liter engine are often due to a bad seal in the drain plug – the metal washer in your drain plug can only be tightened a few times before it loses its ability to seal and should be replaced periodically to prevent leaking.
When did the Montana get a new steering wheel?
For 2001, the Montana received a new steering wheel with the Pontiac logo which replaces the one with the PONTIAC letters.