Is the starter interrupt warning light on or off?

Is the starter interrupt warning light on or off?

Depending on the current status of the system, the warning light will be off, on steady, or flashing. Although they may share the same dash-mounted warning light, these “starter interrupt” anti-theft systems work separately from and independently of the “content theft” systems available from factory and aftermarket suppliers.

When does the anti theft system car wont start?

If the engine does not respond or dies immediately after cranking up, leave the key in that position for 10 minutes. When the security light goes off, turn the ignition off, wait 20 seconds, and then start the engine. These are the most popular ways to solve the problem of anti theft system car wont start.

What is the yellow light on a GM starter interrupt?

In this article, we are concentrating on factory-installed GM starter interrupt systems. This type of anti-theft system is designed to prevent the vehicle from starting unless the correct ignition key is used. These systems used a dash-mounted “security” or “theft” light which can be yellow or red in color.

What does the warning light on the VATS system mean?

If a fault occurs while driving, the engine may or may not start after turning the ignition off. If a fault occurs when trying to start the vehicle, it probably won’t start. The warning light on the VATS system is similar except it does not have the learn mode.

Depending on the current status of the system, the warning light will be off, on steady, or flashing. Although they may share the same dash-mounted warning light, these “starter interrupt” anti-theft systems work separately from and independently of the “content theft” systems available from factory and aftermarket suppliers.

What should I do if my PassLock light is not working?

The most common repair is to replace the ignition lock cylinder or Passlock sensor and perform a relearn procedure. If you find yourself stranded and the engine won’t crank over, turn the ignition off and wait four minutes. Then, try again. If the engine starts, you should be able to make it home.

Why does my car not start when I Turn Off the ignition?

If a fault occurs while driving, the engine may or may not start after turning the ignition off. If a fault occurs when trying to start the vehicle, it probably won’t start.

Is it normal for the security light to go off when the engine is running?

After the learn procedure is completed and the engine is running, the security light may stay on steady for a few minutes and then go off—this is normal. Depending on the system, replacement of key components will necessitate that a relearn procedure be completed.

What to do if your PassLock light does not turn on?

Insert the Key into the ignition switch and try to start the car. It should start, and then stall, with the “SECURITY” light flashing. (In rare cases, the car may keep running and the security light will not illuminate, but that only happens if you are very lucky.)

Why does my car stall with the security light on?

It should start, and then stall, with the “SECURITY” light flashing. (In rare cases, the car may keep running and the security light will not illuminate, but that only happens if you are very lucky.)