What kind of antifreeze do you use on a Honda Accord?
If the level is at or below the MIN line, add coolant to bring it up to the MAX line. This coolant should always be a mixture of 50% antifreeze and 50% water. Never add straight antifreeze or plain water. Always use Genuine Honda Antifreeze/Coolant.
Can you remove the radiator cap while the engine is hot?
Removing the radiator cap while the engine is hot can cause the coolant to spray out, seriously scalding you. Always let the engine and ra- diator cool down before re- moving the radiator cap. MAX MIN Cooling System 2. Turn the radiator cap counter- clockwise, without pressing down on it, until it stops.
What to do when coolant stops draining from Radiator?
Drain the coolant, then put the tank back in its holder. 5. When the coolant stops draining, tighten the drain plug in the bottom of the radiator. Apply non-hardening sealant to the drain bolt threads and reinstall the bolt in the engine block. Tighten it securely. continued Maintenance Cooling System 6.
When do you add coolant to the engine?
If the level is at or below the MIN line, add coolant to bring it up to the MAX line. This coolant should always be a mixture of 50% antifreeze and 50% water.
If the level is at or below the MIN line, add coolant to bring it up to the MAX line. This coolant should always be a mixture of 50% antifreeze and 50% water. Never add straight antifreeze or plain water. Always use Genuine Honda Antifreeze/Coolant.
Drain the coolant, then put the tank back in its holder. 5. When the coolant stops draining, tighten the drain plug in the bottom of the radiator. Apply non-hardening sealant to the drain bolt threads and reinstall the bolt in the engine block. Tighten it securely. continued Maintenance Cooling System 6.
Removing the radiator cap while the engine is hot can cause the coolant to spray out, seriously scalding you. Always let the engine and ra- diator cool down before re- moving the radiator cap. MAX MIN Cooling System 2. Turn the radiator cap counter- clockwise, without pressing down on it, until it stops.
If the level is at or below the MIN line, add coolant to bring it up to the MAX line. This coolant should always be a mixture of 50% antifreeze and 50% water.