Why are the lights not working on my Pontiac Grand Am?
There is a sensor inside the ignition cylinder that has an electronic password. And i had read that if it is the ignition then the lights would not turn off. When you turn the key, the password is sent to the body control module and if it matches, the car will start…if it doesn’t, it won’t start. .
Why is the security light on on my Grand Prix?
You cannot just turn it off unless the problem is fixed. The security light is on because you have a problem with your Passlock theft system. There are temporary fixes, like doing a re-learn of the theft deterrent, but the problem will come back. Most likely, you need a new ignition cylinder. Those are what usually go bad on the Grand Prix cars.
How much oil do you put in a Pontiac Grand Am?
The amount of oil you want to put in the engine is 4.8 liters or 5 quarts. That is straight from General Motors. Thank you very much. Not a problem, thank you and have a good night!
There is a sensor inside the ignition cylinder that has an electronic password. And i had read that if it is the ignition then the lights would not turn off. When you turn the key, the password is sent to the body control module and if it matches, the car will start…if it doesn’t, it won’t start. .
How to bypass the PassLock sensor on a 2002 Pontiac Grand Am?
This web page will guide you through the steps necessary to bypass the “Passlock Sensor” on a 2002 Pontiac Grand Am, and keep the “SECURITY” light off forever. The steps necessary are similar on the other models listed above. There are generally only minor differences in how to get the radio out to get to the wires.
You cannot just turn it off unless the problem is fixed. The security light is on because you have a problem with your Passlock theft system. There are temporary fixes, like doing a re-learn of the theft deterrent, but the problem will come back. Most likely, you need a new ignition cylinder. Those are what usually go bad on the Grand Prix cars.
The amount of oil you want to put in the engine is 4.8 liters or 5 quarts. That is straight from General Motors. Thank you very much. Not a problem, thank you and have a good night!
What to do if your Grand Am won’t start?
When your Grand Am turns over but won’t start it maybe your anti-theft security system. When the security light blinks, the car won’t start. You must do a simple reset. The procedure in this video is what worked for us. Use of the free information in this video is at your own risk.
Why are my tail lights still not working?
I Replaced the Light Bulb but the Tail Lights Still Don’t Work. Part of the series: Maintaining a Car’s Electrical System. If your tail lights won’t come on even after replacing a light bulb, this can be because of a few different things.
Why does my 2003 Grand Am Not Start?
My 2003 Grand Am sometimes wont start. I’ve noticed that when it wont start, the security light is flashing. To resolve the problem I have to leave the key in the ignition with it in the “ON” position for 12 minutes to reset the sensor. The sensor light wiull stop flashing when it is reset.
How to fix a Pontiac Grand Am PassLock sensor?
Best way to fix is to permanently disable/disconnect passlock system. Not fixed, security light comes on solid and goes away in different time intervals while driving, then after a couple of starts it goes in that limp mode where the security light blinks. I continuously have to wait until the light stops blinking….
How much does it cost to fix a no start Pontiac Grand Am?
Our technicians tell us that the ignition lock cylinder should be replace to correct this condition. The average cost for a Pontiac Grand Am No Start Diagnosis is between $88 -$111. Learn More Good news! We found 32 RepairPal Certified shops near you.
My 2003 Grand Am sometimes wont start. I’ve noticed that when it wont start, the security light is flashing. To resolve the problem I have to leave the key in the ignition with it in the “ON” position for 12 minutes to reset the sensor. The sensor light wiull stop flashing when it is reset.
Best way to fix is to permanently disable/disconnect passlock system. Not fixed, security light comes on solid and goes away in different time intervals while driving, then after a couple of starts it goes in that limp mode where the security light blinks. I continuously have to wait until the light stops blinking….
Our technicians tell us that the ignition lock cylinder should be replace to correct this condition. The average cost for a Pontiac Grand Am No Start Diagnosis is between $88 -$111. Learn More Good news! We found 32 RepairPal Certified shops near you.
Why does my Car start when my security light is on?
It works every time but the 12 minute wait is a pain in the ass. Security system has been malfunctioning for a few years. When security light is on solid all the time, the car starts every time. That is because the security system is disabled. Only when the security system is enabled, security light off, the car has starting issues.
What kind of car is the Pontiac Grand Am?
Find sources: “Pontiac Grand Am” – news · newspapers · books · scholar · JSTOR (November 2009) The Pontiac Grand Am is a mid-size car and later a compact car that was produced by Pontiac. The history of Grand Am starts with Pontiac executives noting incursion into the US market by Mercedes and BMW.
What was the compression ratio of the Pontiac Grand Am?
Engines were also detuned to meet the 1975 emission regulations with the compression ratio dropping to a new low of 7.6 to 1 on some engines.
What’s the problem with my Pontiac Grand Am lights?
I ran a check on the system of the car, and I’ve discovered that the EBCM (electronic brake control module) is what’s causing the problem with the lights. The module costs around $600.00 but you might be able to go to a dealer and have the tech reprogram the module.
How much does a Pontiac Grand Am touch cost?
It sounds like it is a $700-$900cdn touch. I have about 71k on my GA and I have already replaced both the left and right wheel bearing retaining hubs. Recently over the last 2 months these lights have been coming on intermittently, generally when driving in wet weather. Any ideas?
Where to get a service engine for a Pontiac Grand Am?
Go to a parts store like O’Riely or AutoZone and use the code scanner. That should give you a good place to start. You can use the code scanner for free or very low cost. You do NOT need to buy one. This could be anything from a cracked vacuum line to a bad computer.
Where is the anti lock brake relay on a Pontiac Grand Am?
If your car is a 2000 or newer you might find the anti lock brake relay underneath the battery tray along the left frame rail of the car. If you go to auto zone they will plug the code scanner into your car for free.
How do you replace a Pontiac Grand Am security light?
Remove the cylinder from the ignition switch and replace with a new cylinder and Passlock housing….after replacement you will need to do a theft re-learn. To know exactly, you’d need a proper scanner to access the body control module and check for theft system codes.
Why are my Pontiac Grand Am security lights not turning off?
The theft deterrent is disabling the starting of the vehicle because you have a problem with it. Your vehicle has what’s called ‘Passlock’. There is a sensor inside the ignition cylinder that has an electronic password. And i had read that if it is the ignition then the lights would not turn off.
When your Grand Am turns over but won’t start it maybe your anti-theft security system. When the security light blinks, the car won’t start. You must do a simple reset. The procedure in this video is what worked for us. Use of the free information in this video is at your own risk.
This web page will guide you through the steps necessary to bypass the “Passlock Sensor” on a 2002 Pontiac Grand Am, and keep the “SECURITY” light off forever. The steps necessary are similar on the other models listed above. There are generally only minor differences in how to get the radio out to get to the wires.
Why does my battery light not come on when I start the car?
Excessive corrosion at the battery terminals can cause a low voltage condition which makes the starter turn slowly when trying to turn on your vehicle, but it will not illuminate the battery light if the alternator is charging properly once the car is started. Step 4: Secure the clamps on to the battery terminals.
When does the battery warning light come on?
May 25, 2016. The battery light or charging warning light, available on the dashboard of your car, indicates malfunctioning or poor charging of the battery. This light illuminates whenever the charging system does not charge the battery with a voltage above approximately 13.5 volts.
When does a battery charger light come on?
This light illuminates whenever the charging system does not charge the battery with a voltage above approximately 13.5 volts. As this warning may be triggered by a number of things, it is important to take steps to ensure that you know what the actual issue is before replacing any parts.
When does a Pontiac Grand Am out of gas?
(PRWEB) February 21, 2005 — If you own a 2001 Pontiac Grand Am, you’d better hope you’re not stuck somewhere bad when this hits: You go to start your car, and the engine cranks, but it seems like your out of gas, and won’t start.
(PRWEB) February 21, 2005 — If you own a 2001 Pontiac Grand Am, you’d better hope you’re not stuck somewhere bad when this hits: You go to start your car, and the engine cranks, but it seems like your out of gas, and won’t start.
How to reset the oil light after an oil change?
How to reset change oil light? Locate your vehicle’s oil change reset button. Within your vehicle’s dashboard and around the gauge, locate a switch, button, or stick with a “reset” name. Change the odometer’s display mode to show total mileage. Press and hold the reset button, followed by turning the key. Confirm that you’ve reset the change oil light successfully.
Why did my engine light come on after an oil change?
If the light comes on after an oil change, the wrong level of oil might be the culprit. Just like the low oil level, an oil level too high could be the reason for an out-of-range oil pressure. If you are positive that you have used the fuel with the correct viscosity rating, check the level.
How do you reset oil change indicator?
Hold the button down until the “Oil” icon or word starts to flash, or the indicator lights show some other sign of resetting. Some cars will flash the word “Reset,” or display the numeral “100” to show that 100 percent of oil life remains after the oil change. Turn the ignition off, wait a few moments, and then start the engine.
How do you reset the change oil light on a Chevy?
Reset Oil Change Due Light on Chevy HHR Procedure: 2006-2011. Turn ignition switch to ON position with engine off. Press the INFO and RESET buttons on the DIC at the same time to enter the personalization menu. Press the INFO button to scroll through the menus until you see “Oil-Life Reset”.