Why are the interior lights not going off in my Pontiac Montana?
The interior lights will “not” go off when I shut the doors. The only way I can turn them off is to use the over-ride switch on the overhead console. I did check the BCM PRGRM and it is set on program three (three tones). I there a multi function module that needs replaced? This is my first time posting a message.
What kind of fuses are in a Pontiac Montana?
Electrical components such as lights, heated seats and radios all have fuses in your 2006 Pontiac Montana SV6 3.9L V6. This free video shows you how to replace a blown interior fuse on a 2006 Pontiac Montana SV6 3.9L V6 About Us Maintenance Parts & Tools Contact English SpanishFrench Search Home Pontiac Uplander 2008
Is there a problem with my Pontiac Montana?
I have a 1999 montana with approx 145k miles. Recently it began having power problems at highway speeds. It appears to cut out like an injector is failing but if you give it more gas the problem goes away. It is a jerky feeling. Not sure if it is an injector, the transmission or what.
Why does my Pontiac Montana horn blow when I hit the brakes?
2000 Montana, when I hit the brakes the horn blows. Is it possible that these wires are somewhere connected? Hi, I have a 2000 Pontiac Montana with the same problem. My interior light comes on when I turn on the rear defrost, brake lights or turn signals. They stay on until I use the overide switch.
Where are the interior lights on a GMC?
Ground is provided to the left middle and left rear door at G302. When the driver uses the door key in order to unlock the doors, the BCM receives a door unlock signal. The BCM must have inputs that indicate that the ignition switch is OFF, the courtesy lamp switch is OFF and all the doors are closed. The BCM will then activate the interior lamps.
What kind of safety features does the Pontiac Montana have?
It came with dual airbags and antilock brakes as standard safety features, and in 2000, all Montanas came with dual sliding doors, and all rear seats were provided with child-seater tether anchors. From 2001 to 2003, the Montana made some minor adjustments in its interior design.
What to do if your Pontiac Montana has an electrical problem?
Look at the connector on the PC Board. The middle one is black, corroded and the black plastic is partially melted. Look at the connector end. The connector is melted around that plug location and the connector is also black and corroded. Use a small flat blade screw driver to clean the pin connection on the PC Board side.
Why are the lights not working on my car?
Hello. It sounds like your time delay in the control module is not working. It may also be a short in the switch but that is not as likely. The retained power relay may be failing or the control module itself may be failing. I typically access the module and see if it will stop supplying power when it times out.
The interior lights will “not” go off when I shut the doors. The only way I can turn them off is to use the over-ride switch on the overhead console. I did check the BCM PRGRM and it is set on program three (three tones). I there a multi function module that needs replaced? This is my first time posting a message.
I have a 1999 montana with approx 145k miles. Recently it began having power problems at highway speeds. It appears to cut out like an injector is failing but if you give it more gas the problem goes away. It is a jerky feeling. Not sure if it is an injector, the transmission or what.
2000 Montana, when I hit the brakes the horn blows. Is it possible that these wires are somewhere connected? Hi, I have a 2000 Pontiac Montana with the same problem. My interior light comes on when I turn on the rear defrost, brake lights or turn signals. They stay on until I use the overide switch.