Where is the lock on a spare tire?

Where is the lock on a spare tire?

Proceed to the passenger side of the license plate, and behind the plastic cover, you should find a key opening. Now, use the ignition key in this space and turn to the right as you tug a little towards you. As you do this, the lock will come apart from the hole. You can now set the assembly at the back of the car.

What’s the best way to get a spare tire down?

Using the pliers, clamp down on the key. Proceed to wiggle the pliers and pull it towards the end of the car. Continue doing this until you have the key loosened. In this regard, it is essential to note that there are many tools that you could use for this process.

What should the pressure be in a spare tire?

In most cases, it should be inflated at 60 psi. It’s a good idea to check the pressure in your tire on occasion, just so you do not try to use it one day only to find out that it doesn’t have enough tire pressure.

Where is the guide tube for a spare tire?

When you are sure that the car is stable, you can settle under the vehicle. Locate the guide tube, which should be towards the back of the truck. Proceed to turn it as you pull it, and this should take place simultaneously. The guide tube will come off, and you will thus have access to the drop assembly of the spare tire.

What’s the best way to remove a spare tire?

When you feel the jack handle engage, turning it counter-clockwise should begin to lower the tire. Periodically, you’ll need to lower the jack as well to allow the tire to come down. Figure 1. Spare tire guide hole. If you can’t remove the tire normally, move on to Step 2.

Can a spare tire get stuck on a Chevy Silverado?

Read on to learn how to remove a stubborn spare tire from your Silverado 1500. This article applies to the Chevrolet Silverado 1500 (1999-2006). The spare tire on the Chevrolet Silverado 1500 is prone to getting stuck on the winch that holds it under the bed.

Why does my GMC Sierra spare tire not come down?

GMC Sierra spare tire won’t come down? Here’s the reason for your problem – on a Chevy Silverado spare tire hoist and GMC Sierra spare tire hoist there is a secondary safety latch that easily rusts and corrodes to leave you with a spare tire that won’t come down and your truck stranded on the side of the road.

How do you lower a tire with a jack handle?

Using the jack handle, insert the square end through the guide hole in the rear bumper. When you feel the jack handle engage, turning it counter-clockwise should begin to lower the tire. Periodically, you’ll need to lower the jack as well to allow the tire to come down.