What to do if your Pontiac G5 key is stuck?

What to do if your Pontiac G5 key is stuck?

If your G5’s key is still stuck after going through all of these steps, it may be time to have a mechanic take a look at the ignition lock and see if it has gone bad. If there’s anything that you’ll like to add, please leave a comment below.

What does it mean when your G5 won’t start?

The first and most common is when it won’t turn over. This just means that the engine doesn’t move when you turn the key. The second way that your G5 won’t start is when the engine turns when you engage the starter, but it won’t fire and run on its own.

What to do if your key gets stuck in the ignition?

Take the good key and duplicate it. Rusted – A key that is rusted can get stuck in the ignition system easily. It doesn’t have to be a lot of rust. Just enough to keep it from moving freely. As with a bent key, just start over. Once something rusts, it comes back a lot easier.

What causes a car to crank but not start?

One of the biggest issues that causes a vehicle to crank but not start is ignition issues. When there is no spark, the engine will not start. You’ll probably have a misfire related code such as P0300, P0301, etc….. Ignition issues can be caused by many things, including bad spark plugs, bad coil packs, bad plug wires, computer issues, and more.

If your G5’s key is still stuck after going through all of these steps, it may be time to have a mechanic take a look at the ignition lock and see if it has gone bad. If there’s anything that you’ll like to add, please leave a comment below.

What causes a car key to get stuck in the ignition?

The key will only get stuck in the ignition if the car is stationary, which may cause the battery to go flat if it cannot be moved out of the “accessory” position to the “off” position. The problem is reportedly caused by the automatic transmission shifter, which doesn’t transmit an electrical signal to allow the switch to be turned off.

What should I do if my car key won’t come out?

Any car key in an ignition should easily slide out after you have completely rotated it counterclockwise and (if applicable) pushed the key release button. If the key won’t come out of the ignition, then you need to understand the possible cause of this problem. There are a variety of reasons as to why your car key won’t come out.

Why does my GM car say no start no crank?

How to diagnose a no start no click on GM vehicle. If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that.

Why is the ignition key stuck in my G8?

If the transmission isn’t in park, or if the computer doesn’t think it’s in park, then the ignition cylinder won’t let go of the key. Here are a couple of threads about stuck keys, both were caused by the shifter in some way:

Where is the R8 relay on a Pontiac G8?

There is an accesory relay labeled “r8” in the fuse block thats on the drivers side of the vehicle that controls power to the ignition lock cylinder solenoid. When the relay fails you wont be able to remove the key.

If the transmission isn’t in park, or if the computer doesn’t think it’s in park, then the ignition cylinder won’t let go of the key. Here are a couple of threads about stuck keys, both were caused by the shifter in some way:

There is an accesory relay labeled “r8” in the fuse block thats on the drivers side of the vehicle that controls power to the ignition lock cylinder solenoid. When the relay fails you wont be able to remove the key.

What causes a locked steering wheel to not turn in?

If a locked steering wheel is the only thing preventing your key from turning the ignition, then follow our instructions below for How to Unlock a Locked Steering wheel and you will be back on the road fast. Problem 2. Dirt, pocket lint or debris (like tape from opening a package) may cause your key not to turn in your ignition lock cylinder.

Why does my Gm key not turn in?

The GM (Buick, Cadillac, Chevy, GMC, Hummer, Oldsmobile, Pontiac) ignitions tend to fail because of wear from inserting the key at a slight angle. This is the same for the Chrysler vehicles (Chrysler, Dodge, Eagle, Jeep, Plymouth).

How can I unlock a locked steering wheel?

1. Try pulling the key out a very small amount before gently turning key. (About 1/16 of an inch, the thickness of a nickel). 2. Wiggle key while trying to turn key gently.

If a locked steering wheel is the only thing preventing your key from turning the ignition, then follow our instructions below for How to Unlock a Locked Steering wheel and you will be back on the road fast. Problem 2. Dirt, pocket lint or debris (like tape from opening a package) may cause your key not to turn in your ignition lock cylinder.

How does a GM tilt steering wheel work?

This is done by using a telescoping tube design with an injection-molded plastic key to lock the tube and shaft together: This plastic key will shear when the torso hits the steering wheel during a severe collision, allowing the shaft to collapse into the tube instead of punching your heart out through your spine.

Are there any recalls on the Pontiac G5?

On March 27, 2014, GM notified the agency that the defective ignition switches may have been used as service replacement parts on other vehicles, and as a result GM will be recalling certain model year 2008-2010 Chevrolet Cobalt, Saturn Sky, and Pontiac G5 and Solstice, and 2008-2011 Chevrolet HHR vehicles.

Take the good key and duplicate it. Rusted – A key that is rusted can get stuck in the ignition system easily. It doesn’t have to be a lot of rust. Just enough to keep it from moving freely. As with a bent key, just start over. Once something rusts, it comes back a lot easier.

The first and most common is when it won’t turn over. This just means that the engine doesn’t move when you turn the key. The second way that your G5 won’t start is when the engine turns when you engage the starter, but it won’t fire and run on its own.

Why does my key keep getting stuck in the ignition?

Here are some of the most common reasons why the key would get stuck in the ignition. They are presented somewhat in the order of most likely to least likely to be the cause. All vehicles equipped with automatic transmissions have a lock that keeps the key from being removed from the ignition while the vehicle is in gear.