How to change the brake discs on a Peugeot 207?
Your Peugeot 207 (WA_,WC_) deserves nothing but the best, which is why Brembo suggests 4 different options for changing the brake discs. To make sure that your new brake disks perform as they should, Brembo recommends always replacing the pads together with the disks. Brembo Original discs are first and most natural choice suggested by Brembo.
When to replace brake pads with Brembo discs?
To make sure that your new brake disks perform as they should, Brembo recommends always replacing the pads together with the disks. Brembo Original discs are first and most natural choice suggested by Brembo. The undrilled, unslotted rotors of these disks offer a comfortable drive and increased brake pad life.
Why does my steering wheel shake when I brake?
Brake Pad Issues. Your steering wheel can shake if your pads are contaminated with oil, dirt, or other substances. They can cause vibration when they grip the rotor. This shaking can also happen if the pads are warped, damaged, or excessively worn. If it’s your brake pads, you will likely hear a high pitched whining noise when braking.
Why do Brembo Xtra brake discs have holes?
The special holes in the rotors of Brembo Xtra disks also keep the brake pad clear of accumulated debris. The holes also help prevent brake fade caused by overheating and more effectively evacuate the gas produced as a result of friction against the pad.
How much does it cost to get front brake pads on a Peugeot?
Get your Peugeot fitted with new front brake pads for a fixed price of: If you need both front brake discs and pads, you they can be fitted for a fixed price of: Looking for rear brake pads / discs for your Peugeot?
How to replace front brake pads on a Peugeot 3008-5008?
Peugeot 3008 and 5008 front brake pads replacement pictorial 1- Start by loosening the brake fluid reservoir cover. 2- Remove it and put it aside not to forget that you loosened it. 3- Block the back wheel on the other side of your intervention.
Why does my car have vibration when I brake?
Bolting a disc to a warped hub will always result in brake vibration. The same will happen if any rust from the hub surface is not removed before fitting the disc. THE SOLUTION: After fitting a disc, always check for disc run-out using a dial gauge.
What should I do if my brake pads are uneven?
We suggest that you should try to avoid harsh brake applications for the first 120 miles or so, as this will help new discs and pads to bed in. In the longer term there can be a number of reasons why pads and discs wear unevenly, such as: