How much oil does a 240SX need?
Engine Oil
| Viscosity: | 10W-30 (Above -18) 5W-30 (All TEMPS) SAE 5W-30 is preferred. |
|---|---|
| Capacity: | 4 quarts (with filter)After refill check oil level. |
| Torque: | 22-29 ft/lbs (Oil Drain Plug) |
What kind of oil does a Nissan 240SX use?
THE RUBBER THAT SITS ON TOP OF THAT ALSO WAS DRENCHED IN GEAR OIL, AND WAS/IS VERY STINKY. WARM IT UP, IT WILL EVAPORATE AND STINK EVEN WORSE. SINCE I;M BACK, IT DOESN’T STINK AT ALL.
What kind of oil do you put in a Volvo 240?
Place a funnel inside the filler hole and pour four quarts of 10W-30 oil into the engine. For colder climates, you may use 5W-30 oil instead. Reinstall the oil filler cap. Start the engine and let it run, checking the drain plug and oil filter for any leaks. Almost done!
When did the Nissan 240SX S13 come out?
Note: the Nissan 240SX S13 is known as the S13 Silvia or 180SX in Japan, and the 200SX RS13U in Europe. Nissan introduced the S13 in Japan in the middle of 1988 as a 1989 model year.
Which is the best engine oil for a Nissan S13?
Best Engine Oil for a Nissan S13 Engine Thickness KA24E 5W-30, 10W-30, 10W-40 KA24DE 5W-30, 10W-30, 10W-40 CA18DE 10W-30, 10W-40, 15W-40 for normal use/en CA18DET 10W-30, 10W-40, 15W-40 for normal use/en
THE RUBBER THAT SITS ON TOP OF THAT ALSO WAS DRENCHED IN GEAR OIL, AND WAS/IS VERY STINKY. WARM IT UP, IT WILL EVAPORATE AND STINK EVEN WORSE. SINCE I;M BACK, IT DOESN’T STINK AT ALL.
Note: the Nissan 240SX S13 is known as the S13 Silvia or 180SX in Japan, and the 200SX RS13U in Europe. Nissan introduced the S13 in Japan in the middle of 1988 as a 1989 model year.
What kind of oil do you put in a Datsun 240Z?
We recommend Lucas Oil’s high zinc engine oil. The most important consideration to keep in mind when choosing the type of engine oil for your 240Z is that it should be a high-zinc oil. Due to the L24’s flat-tappet camshaft design which involves sliding contact rather than rolling contact.