Where is the oil drain plug on a softail motorcycle?
Unscrew the engine oil drain plug with a 5/8-inch socket and a socket wrench. On Softail models the engine oil drain plug is under the right side of the motorcycle’s frame, near the rear wheel. Dyna and Touring models have their oil drain plugs under the transmission housing. Drain the engine oil into an oil pan.
Where is the transmission drain plug on a Dyna?
Unscrew the transmission housing’s drain plug, using a 5/8-inch socket. On Softails, the drain plug is found between the rear shocks; Dyna and Touring models have drain plugs under the left side of the engine’s oil pan. Replace the drain plug’s O-ring, then screw it into place after the oil has drained.
How to change transmission fluid in a Harley Davidson Softail?
Use a 7/32″ Allen key or socket to start threading the plug, then switch to the 5/8″ socket. Final torque is 20 ft.-lbs. Figure 6. A small amount of metal shavings on the drain plug magnet is normal. Inspect the fill plug o-ring for damage and replace if necessary.
Where is the oil tank drain plug located?
Locate the oil tank’s drain hose on the left side of the frame below the transmission housing. Locate the transmission fluid drain plug under the transmission cover on the left side of the transmission housing. Locate the primary fluid drain plug directly below the round derby cover on the outer primary cover. Unscrew the oil tank’s filler cap.
Where is the drain plug on a Harley Davidson Softail?
Locate the drain plug between the shocks on the bottom side of the transmission. It’s difficult to see and access, but with a 3/8″ ratchet, 6″-8″ extension, universal joint, and a 5/8″ socket, it can be removed. Place your drain pan underneath the bolt.
Where is the fluid drain plug in a transmission?
Locate the transmission fluid drain plug under the transmission cover on the left side of the transmission housing. Locate the primary fluid drain plug directly below the round derby cover on the outer primary cover. Unscrew the oil tank’s filler cap.
Use a 7/32″ Allen key or socket to start threading the plug, then switch to the 5/8″ socket. Final torque is 20 ft.-lbs. Figure 6. A small amount of metal shavings on the drain plug magnet is normal. Inspect the fill plug o-ring for damage and replace if necessary.
Locate the oil tank’s drain hose on the left side of the frame below the transmission housing. Locate the transmission fluid drain plug under the transmission cover on the left side of the transmission housing. Locate the primary fluid drain plug directly below the round derby cover on the outer primary cover. Unscrew the oil tank’s filler cap.