What kind of oil do I use for a Dodge Stealth?
The bearing clearances on the older engines plus the heat of the summer months takes its toll on your oil pressure. Use 10w30 if you drive in the cold months on a high mileage engine. If you want to save a bunch Rotella 10w40 does a great job from detonation protection on your Bearings. The best synthetic for the money is Redline, hands down.
Why is my oil pressure low on my Dodge Ram?
If low or erratic, then you know you got a pump issue. If pressure is normal and steady, then call the sensor or possible associated wiring. Those older 4.7s have issues with sludging up and/or having the paint on the inside of the oil pan delaminate, both of which will plug up the oil pick up tube.
What to do if your oil pressure is low?
You are going to have to go old school with a pressure gauge and adapter by taking off the sensor and hooking up where the sensor threads in and check pressure mechanically. If low or erratic, then you know you got a pump issue. If pressure is normal and steady, then call the sensor or possible associated wiring.
When to reset the Dodge oil change indicator?
When your vehicle is ready for an oil change, Dodge has a recommended list of scheduled maintenance items that coincide with the mileage accrued: After your oil change and servicing is complete, you might need to reset the Oil Change Indicator system in your Dodge. Learn how to do this by following the directions below:
The bearing clearances on the older engines plus the heat of the summer months takes its toll on your oil pressure. Use 10w30 if you drive in the cold months on a high mileage engine. If you want to save a bunch Rotella 10w40 does a great job from detonation protection on your Bearings. The best synthetic for the money is Redline, hands down.
What are the symptoms of a bad fuel pressure regulator?
Another symptom of an issue with the vehicle’s fuel pressure regulator is fuel leaks. If the fuel pressure regulator’s diaphragm, or any of the seals fail, fuel leaks can occur.
What kind of oil does a Dodge 3000GT use?
There is strong evidence from BITOG (Bob is the oil guy) that M1 has switched from a group 4 to a group 3 based oil while keeping the higher price that goes along with Group 4 production.
What should I do if my gas gauge is not working?
Note that some self-test steps may stop the gas gauge at 1/4, 1/2, and 3/4, as well. Fuel sender test. The fuel sender test should be conducted when the tank is lower than HALF, to prevent fuel splashing. Start by making sure the plug is clean, dry, and free of corrosion. Make sure the pins are straight and that the connector is fully seated.