What is the oil mixture for a Mercury outboard motor?
As a general rule of thumb, add three ounces of Mercury 2 stroke premium outboard motor oil for each gallon of gas. Pour the gas and oil into a singular container. Close the gas container tightly and then shake the container vigorously to ensure that the oil and gasoline mix thoroughly.
What can I use for lower unit oil?
You can use any brand of lubricant that has a grade designation of API GL5 SAE 80 or 90 weight. Make sure you do not mix different oil brands or weights. into the BOTTOM drain hole. Then slowly squeeze the bottle to force the oil into the lower unit.
Do you mix oil and gas for a Mercury outboard motor?
Mixing Fuel for a Mercury Outboard Motor. Older two-stroke Mercury outboard motors require hand mixing of oil and gas. Newer models like the OptiMax motors have an oil injection system that keeps the ratio of gas to oil correct.
How do you change the oil on a Mercury 115?
Our Mercury 115 four stroke oil change is a pretty basic process. First, we’ll remove the cowling so we can access the motor. Then, we’ll tilt the motor up in order to drain the oil. It is important that you not only tilt the motor up but turn the motor to the side so that the oil drain is facing towards the ground. Otherwise, it’s a mess.
How often should you change the oil on a Mercury outboard?
Mercury recommends changing the oil on your Mercury outboard every 100 run hours. Our Mercury 115 four stroke oil change is a pretty basic process.
What kind of oil is in MerCruiser 4 cycle?
MerCruiser / Quicksilver Synthetic Blend, NMMA FC-W rated, 4 cycle oil. 2. MerCruiser / Quicksilver 25W40 NMMA FC-W rated oil. 3. A NMMA FC-W rated oil. 4. MerCruiser / Quicksilver 4-cycle 25W40, non FC-W rated oil.
What kind of oil do you put in a Mercury outboard?
– Mercury or Quicksilver Premium 2-Cycle TC-W3 Outboard Oil 2-stroke oil is normally added to the fuel tank when filling with fuel. The underlying provider failed on Open.
What kind of oil do you use in a Mercury verduro?
For Mercury Verduro models that are between 275 and 300 horsepower, use premium unleaded gasoline with a posted octane minimum of 95 along with Mercury or Quicksilver OptiMax/DFI 2-Stroke Outboard Oil. For Mercury 350 horsepower Verduro models, use premium unleaded gasoline with a minimum of 98 octane instead of 95.
What kind of oil does a Mercury autoblend use?
– Mercury or Quicksilver Premium Plus 2-Cycle TC-W3 Outboard Oil. Autoblend models have an oil reservoir mounted inside the boat that automatically blends oil with the fuel at a constant ratio of 50:1; 2-stroke oil is added to the reservoir and does not need to be mixed with the fuel (unless required for running-in)
What kind of fuel does a Mercury Mariner use?
Fuel that exceeds 10% ethanol is not recommended; MERCURY & MARINER FUEL RECOMMENDATIONS. Use a major brand of automotive unleaded petrol (ULP) with a minimum posted octane rating of 91; These recommendations apply to Mercury and Mariner 2-Stroke, 4-Stroke, Verado and OptiMax models unless specified otherwise (ref to “Notes & Exceptions” following)