How much oil does a 2008 Volvo S60 take?

How much oil does a 2008 Volvo S60 take?

Capacity: 6.1 quarts (with filter)After refill check oil level.

How do I change my own oil filter?

How to Change Your Oil

1. Step 1: Jack It Up, Open It Up. First, you’ll want to lift the car high enough to give yourself room to work under it.
2. Step 2: Unplug It, Drain It.
3. Step 3: Off With the Old Filter.
4. Step 4: Drain Plug in, Filter On.
5. Step 5: Fill It Back Up with Oil.
6. Step 6: Check the Oil Level, Check for Leaks.

What kind of oil does a 2008 Volvo S60 use?

The 2008 Volvo S60 has either a 2.4 L 5-cylinder or a 2.5 L 5-cylinder engine that both need 5W-30 Synthetic Motor Oil in below 104 F temperatures. The capacity for the vehicle iS6. 1 quarts with a filter and the torque for the drain plug is 28 ft/lbs for both versions.

Where is the oil filter on a Volvo S60?

This video shows you the location of your oil drain plug, oil filter, oil fill cap and dipstick in addition to the steps needed to change the oil and filter in your S60. For most Volvos, you can wrap an old belt around the oil filter and unscrew it by hand. If you can’t do this, see our parts page to find a Volvo S60 oil filter wrench.

How do you change engine oil in a Volvo?

Remove the oil plug (17mm socket) and drain the engine oil (If you have drive the car before be caution, as it will be HOT) Step 5. While oil is draining, from the top of the car, with the 36mm socket remove the oil filter housing cover (located front of engine as marked in yellow in the image below) and replace the filter insert with the new one:

How do you change transmission fluid in a Volvo S60?

Remove the 24mm bolt located on the bottom of the transmission to remove the fluid. Once the fluid has been drained, replace the 24mm bolt with a new drain plug washer and tighten. Install your new fluid. Lower the car and drive around the block. Check the fluid level and adjust. Volvo S60 Transmission Fluid Replacement – Smooth Shifts!

Where is the oil drain pan on a Volvo?

Open the hood. Remove the lid for the oil filter housing, located on the passenger side of the engine. Remove the oil filter cartridge inside the housing. Remove the six 10 mm bolts that hold the black skid plate to the chassis under the engine to get at the oil drain pan.

This video shows you the location of your oil drain plug, oil filter, oil fill cap and dipstick in addition to the steps needed to change the oil and filter in your S60. For most Volvos, you can wrap an old belt around the oil filter and unscrew it by hand. If you can’t do this, see our parts page to find a Volvo S60 oil filter wrench.

What happens when I change the oil in my Volvo S80?

When you change your own oil, you know that you are putting quality oil in your S80 and that the filter is being changed too. Most importantly, you get a chance to look around under your S80 for potential trouble spots.

How to change the oil in a Nissan pickup?

Find Oil Filter – Locate the oil filter 6. Remove Filter – Position drain pan and remove the oil filter 7. Replace Filter – Add oil to the new oil filter and insert it 8. Remove Oil Cap – Take off the oil fill cap 9. Add Oil – Determine the correct oil type and add oil 10. Replace Cap – Put the oil fill cap back on the engine 11.

How do you fix a leaking oil filter?

Replace Filter – Add oil to the new oil filter and insert it 8. Remove Oil Cap – Take off the oil fill cap 9. Add Oil – Determine the correct oil type and add oil 10. Replace Cap – Put the oil fill cap back on the engine 11. Leak Inspection – Start vehicle and visually inspect for leaks 12.