Where is the oil pressure switch on a Dodge Ram?
The oil pressure switch is located behind the distributor. Use the ratched photo above to gauge where it is. Here is another photo of the oil pressure switch with the harness attached: To disconnect the harness, the red clip must be pushed left.
How to troubleshoot 6.5 Turbo diesel oil pressure switch?
Open the hood and locate the fuel filter. Remove the two bolts holding the assembly to the block, and move it to the side. Removing the fuel hoses is not necessary.
How do you unplug an oil pressure switch?
To do this, place a large basin under the oil pan and open the drain plug with a wrench. Then, using an oil filter wrench, loosen the oil filter before removing it by hand. You’ll now be able to get to the oil pressure switch. You’ll see that a connect cable goes to the oil pressure switch that you need to unplug.
Why is my oil pressure switch not working?
When closed it provides power to the fuel transfer pump, sending a signal to either an idiot light or an oil-pressure gauge on the dash. Problems with the switch can cause the engine to quit or run poorly. Open the hood and locate the fuel filter. Remove the two bolts holding the assembly to the block, and move it to the side.
When to replace oil pressure switch on Dodge Ram?
Replacing Oil Pressure Switch On 94-01 Dodge Ram – Race & Track Driving (formerly Win HPDE) Become a better driver. Race & Track Driving Driving Essays Concepts Driving Technique Track Guide Data Acquisition For Instructors Car Prep Tech Car Setup About Replacing Oil Pressure Switch On 94-01 Dodge Ram Published: December 3, 2014 Tools
How to remove an oil pressure sensor from a Ram 1500?
Access our Ram 1500, 2500, 3500 2001-2005 Oil Pressure Sensor Repair Guide Removal and Installation by creating an account or signing into your AutoZone Rewards account. Once you sign in, follow these instructions to access our Repair Guides.
Where can I get an oil pressure switch?
These are sold at auto parts stores: While a regular 27 mm socket would fit over the pressure switch, standard sockets are not deep enough to engage the hex on the switch: It may also be handy to obtain a specific extension length so that the ratchet clears the engine but does not hit the firewall.
How to repair an oil pressure sensor on a Grand Cherokee?
Add your vehicle in Manage My Vehicles. Enter your vehicle details. Click the “View More” button, and then click “Vehicle Repair Guides.” Select the chapter “Oil Pressure Sensor Repair Guide”.