What kind of motor oil does a Yamaha Grizzly 660 take?
Yamalube Oil Change Kit 10W-40 for Yamaha GRIZZLY 660 4×4 2002-2008.
How much oil do you put in a Yamaha Grizzly 660?
Fill the engine with 2.11 quarts of 10W40 ATV engine oil, and reinstall the dipstick.
How much oil does a 2004 Grizzly 660 take?
What kind of oil does a Grizzly 660 use?
Protect your Grizzly 660 in any riding condition with our specially formulated synthetic lubricants. Whether it’s extreme heat, high-rpm riding or heavy towing, our motor oils will keep your 2005 Yamaha Grizzly 660 protected.
What kind of lube do you use on a grizzly?
I use a 80W90 EP/GL5 lube. While the previous Grizzly owners manuals only called for a SAE 80 GL4 spec oil the new manuals state that you may use a 80W90 GL5 oil (it still states the SAE 80 GL4 oil). I use dino oil as the biggest contributors to wear relief are in the additive pack and not so much the base oil.
Can you change the oil on a Yamaha Grizzly?
The steps for changing the oil in a Yamaha ATV are the same or similar across all models. However, if you want a more in-depth look at an oil change on an older model quad, watch the video below to see how to change the oil in a 2007 Yamaha Grizzly YFM700 . If playback doesn’t begin shortly, try restarting your device.
What kind of oil does a Harley Davidson use?
Yamalube is no exception, another that comes to mind is Harley Davidson. Yamalube is synthetic blend and all the reading I have done says full synthetic is way better for protection, long drain intervals, high flash point and low temp flow ability and protection from shear and viscosity loss.
What kind of oil does a Grizzly 660 take?
Lubrication: Yamaha Grizzly 660’s oil capacity differs with and without an oil filter change. At draining, it is 2 US quarts/1.9 liters. At disassembly, it is 2.2 US quarts/2.3 liters, and the oil filter change capacity is 2.1 US quarts/2 liters. Use SAE 5W, 10W-30, or 20W-40 Yamalube 4 4-stroke oil or equivalent motor oil for top performance.
What are the specs of a Yamaha Grizzly 660?
Yamaha Grizzly 660 Specs 1 Engine: It uses a four-stroke, liquid-cooled, single-cylinder SOHC engine. 2 Recommended fuel: Use unleaded gasoline with a pump Octane number of 86+ and a research Octane number of 91 or higher. 3 Lubrication: Yamaha Grizzly 660’s oil capacity differs with and without an oil filter change.
I use a 80W90 EP/GL5 lube. While the previous Grizzly owners manuals only called for a SAE 80 GL4 spec oil the new manuals state that you may use a 80W90 GL5 oil (it still states the SAE 80 GL4 oil). I use dino oil as the biggest contributors to wear relief are in the additive pack and not so much the base oil.
Why do I need to change the oil in my Yamaha Grizzly?
The two major properties of oil are to lubricate and clean. The interval in which you will need to change oil (synthetic or not) depends on the mechanical condition of the engine, and environment or climate the engine is operating in. Synthetic oil has more uniform molecules which provide greater lubrication and protection.