How to pass inspection and complete a drive cycle?

In this video I’ll show you how to complete a drive cycle and pass inspection after turing off your check engine light. It is true that your car will not pass inspection if the check engine light is on. However there is more to it than simply turning it off.

How long must I Drive after new Toyota Camry?

In inspection. I took my car to Firestone and did not pass. I later learned that to drive the car for approximately 100 miles for the computer to calibrate. I miles. On the very day I planned to retake the smog inspection, my check engine light came on.

How often should I idle my car battery?

Researching on the internet was of little help. Someone suggested idling the car for 15 minutes every other day. Another explanation was that these days, the whole charging-and-depleting system has improved so much that the battery is fine for a month.

How often do you need to charge your car battery?

“The best thing [to do to keep your battery charged] is to drive the car on a regular basis; every three to four days should be fine,” says Calvin Feist, instructor at NAIT in Edmonton. “It needs to be driven and not idled.”

Do you need a new battery for a Honda Civic?

If you want to drive the car a few more years, a new battery is not a bad idea If you just want to fix it and flip it, get a refurbished If you don’t have the experience or the safety equipment for working with hybrid batteries, I’d leave it to the pro’s.

How long does a Honda Civic Hybrid battery last?

And if it is…I guarantee the computer is probably 4-5 generations behind. The Lithium battery in cars is designed to last well past 100k miles. Many lasting past the 150k mile mark. I know of at least one person with a Honda Civic Hybrid who’s past the 100k mark on the original battery.

How to pass car inspection after changing battery?

4) get into the car, take it for a drive of various speeds, starting at 25 mph for about 1-5 miles….as time goes on, increase your speed to the LEGAL SPEED LIMITS on your roads…DO NOT SPEED. If you can, THEN get on the highway, and go the SPEED LIMIT for about 5-10 miles….

What is the owner’s manual for a 2005 Honda AquaTrax?

2005 Honda ARX1200T2/N2 AQUATRAX R-12X/R-12 OWNER’S MANUAL Congratulations on choosing your Honda personal watercraft (PWC). When you own a Honda, you’re part of a worldwide family of satisfied customers people who appreciate Honda’s reputation for building quality into every product.

What should I do if my Honda check engine light is not working?

Check to see that all electronics in the vehicle are working properly (e.g. dash light, 12-volt power supply, interior lights). If everything is working properly, I would either test all the fuses (using a test light or a voltage meter is the fastest way to do that) or return the vehicle to the person who did the work. 5.

How to check readiness code on Honda Acura?

Honda/Acura , from the owner’s manual, to check if the readiness codes are set, turn the ignition switch to the ON (II) position, without starting the engine. The MIL will come on for 20 seconds. If it then goes off, the readiness monitors are set. If it blinks five times, the readiness monitors are not set. Drive Cycles to Reset OBD II Monitors

What’s the cold start temperature for a Honda Civic?

The following is a Honda Civic OBDII Drive Cycle Pattern. Cold Start: Begin from Cold Start, and ignition in OFF position for at least 1 hour. ensure your Honda’s fuel tank is between 1/4 and 3/4 full and engine coolant temperature must be below 122°F and within 11°F of the ambient air temperature.

When do I know it’s time for service on my Honda?

Your Honda measures driving style, road conditions, and more to let you know when service is due. When you see the wrench, it’s time for Service.

How often should I check my Honda Civic monitor?

Obey all traffic laws while performing drive cycles. Please perform the drive cycle cautiosly and at your own risk. Use a OBD-II scan tool to check the status of the monitors once you’ve completed the drive cycle at least once. The following is a Honda Civic OBDII Drive Cycle Pattern.

Is the Honda Civic ready for the smog test?

The entire process of self-testing various emission control systems is called a Drive Cycle. By following the Honda Civic drive cycle below you will be able to get the monitors to run, and if all tests pass, become ready for the smog test. Obey all traffic laws while performing drive cycles.

What happens at the end of the drive cycle test?

The last step of the general drive cycle test is to complete a final OBD-II scan for trouble codes. This is something that will verify that the drive cycle test has been completed successfully. Sometimes a drive cycle test will discover other hidden emission problems that did not register initially.

What do you need to know about inorder to pass inspection?

Inorder to pass inspection your car needs to complete a full drive cycle so that all (8) internal monitors have a status of “Ready”. If any of the (8) monitors have a status of “Incomplete” that means you have not yet completed a full drive cycle and you need to drive your car around more.

What does incomplete mean on a drive cycle?

If any of the (8) monitors have a status of “Incomplete” that means you have not yet completed a full drive cycle and you need to drive your car around more. Your car will need to experience city driving situations and highway driving situations inorder to complete a full drive cycle.

What was the drive cycle for incomplete readiness?

He then turned off his vehicle and restarted the vehicle the next morning and allowed it to idle for another 5-10 minutes. He stated that this procedure completed the AIR readiness monitor.

If you have a Code Scout 700 http://amzn.to/Nnwvot you can get a reading that tells you how many monitors are ready and how many are incomplete. All 8 monitors need to be in a “ready” status before you can pass inspection.

How to clear check engine light and pass emissions test?

If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. I post about consulting, personal finance, and Texas life.

Do you need to clear fault codes before a drive cycle?

After completing any emissions-related service, you need to clear all OBD-II diagnosis fault codes by using a professional digital scanner. This needs to be completed prior to beginning the actual drive cycle test.

How to decelerate a General Motors OBDII drive cycle?

Decelerate with using the brake [or the clutch!] by coasting down to 20 MPH or less, then stop the vehicle. Allow the engine to idle for 10 seconds, turn the key off, and wait one minute. General Motors (specific) OBD II Drive Cycle Performing a GM OBDII Driving cycle: Cold Start.

What is the drive cycle on a Ford?

Newer Ford owner’s manuals include a drive cycle, which is as follows: The OBD-II system is designed to check the emission control system during normal driving. A complete check may take several days.

How long does it take to complete a drive cycle?

Always refer to your vehicle service manual or a professional mechanic who has access to the exact drive cycle instructions — and follow them to ensure accuracy. In most cases, a correct drive cycle will take no longer than 15 minutes to complete. Step 1: Finish Repairs and Clear all Fault Codes

What’s the driving cycle for a General Motors car?

Hold a steady speed of 88km/hr (55mph) for 3 minutes. During this time the O2 response, air Intrusive, EGR, Purge, Misfire, and Fuel Trim diagnostics will be performed. Decelerate. Let off the accelerator pedal. Do not shift, touch the brake or clutch. It is important to let the vehicle coast along gradually slowing down to 32km/hr (20 mph).

What are the requirements for an OBDII driving cycle?

To perform an OBDII Driving cycle do the following: Cold Start. In order to be classified as a cold start the engine coolant temperature must be below 50°C (122°F) and within 6°C (11°F) of the ambient air temperature at startup. Do not leave the key on prior to the cold start or the heated oxygen sensor diagnostic may not run.

How many driving cycles does a car need?

Hold Steady Speed. Hold a steady speed of 88km/hr (55mph) for five minutes. During this time, in addition to the diagnostics performed in step 4, the catalyst monitor diagnostics will be performed. If the catalyst is marginal or the battery has been disconnected, it may take 5 complete driving cycles to determine the state of the catalyst.

Navigation