How do you change the thermostat on a Nissan truck?
Apply a bead of liquid gasket around the mating surface on the four-cylinder engine. Set the thermostat housing in place over the thermostat and tighten the bolts from 12 to 15 foot-pounds on the V-6 engine and 5 to 6 foot-pounds on the four-cylinder engine, using a torque wrench and socket.
Can you change the thermostat on a V-6 truck?
A mixture of antifreeze and water, along with a thermostat that opened and closed to control the flow of the water and antifreeze, regulated the temperature of these engines. Replacing the thermostat in either the V-6 or four-cylinder engine is easy, and the processes for the two engines are nearly identical.
How do you change the radiator in a Nissan truck?
Raise the front of the Nissan with a floor jack and slide jack stands beneath the vehicle’s frame rails. Lower the truck until only the jack stands support its weight. Slide under the Nissan truck and locate the radiator drain plug under the lower radiator hose — the rubber hose on the bottom of the radiator.
Where is the drain plug on a Nissan truck?
Slide under the Nissan truck and locate the radiator drain plug under the lower radiator hose — the rubber hose on the bottom of the radiator. Place the drain pan under the drain plug and remove the plug with a ratchet and socket.
How does the thermostat work on a Nissan pickup?
When the engine is running, the thermostat regulates the coolant flow from the radiator to the engine, allowing only the proper amount of coolant throughout the engine block. If the thermostat sticks, replace it as soon as possible. Park the 1991 Nissan pickup on a level surface. Set the parking brake and open the hood.
How does the cooling system on a Nissan pickup work?
The cooling system on the 1991 Nissan pickups come equipped with a thermostat that regulates the engine’s temperature. The thermostat is made up of a temperature-sensitive spring that moves the thermostat up and down in reaction to the temperature of the coolant.
Where is the radiator hose on a 1991 Nissan pickup?
Park the 1991 Nissan pickup on a level surface. Set the parking brake and open the hood. Locate the top radiator hose that runs from the top of the radiator to the engine block. Follow the top radiator hose from the radiator to the thermostat housing. The hose is attached to the thermostat housing tube.
A mixture of antifreeze and water, along with a thermostat that opened and closed to control the flow of the water and antifreeze, regulated the temperature of these engines. Replacing the thermostat in either the V-6 or four-cylinder engine is easy, and the processes for the two engines are nearly identical.
Apply a bead of liquid gasket around the mating surface on the four-cylinder engine. Set the thermostat housing in place over the thermostat and tighten the bolts from 12 to 15 foot-pounds on the V-6 engine and 5 to 6 foot-pounds on the four-cylinder engine, using a torque wrench and socket.
What kind of engine did a 1995 Nissan Hardbody have?
The 1995 Hardbody came standard with a 2.4-liter, four-cylinder engine that produced 134 horsepower and had an available 3.0-liter V-6 that created 153 horsepower. A mixture of antifreeze and water, along with a thermostat that opened and closed to control the flow of the water and antifreeze, regulated the temperature of these engines.
How much coolant does a Nissan Hardbody have?
Add 50-50 premixed coolant to the reservoir until it reaches the “Max” line on the reservoir, if needed. The 2.4-liter engine holds a capacity of 2.15 gallons of coolant and the 3.0-liter holds 2.85 gallons. Close the Nissan’s hood.
How do you remove an old thermostat from a car?
Remove the old gasket. You may need to use a paint scraper to remove all of the old gasket from the surface of the housing. Pinch the raised portion of the thermostat with your thumb and forefinger and pull the thermostat from its seat.
Where does the coolant leak from a car thermostat?
Coolant leaks around the thermostat housing or under the vehicle. This can be noticeable in a variety of locations, but most commonly around the thermostat housing. This can eventually cause other coolant hoses to leak as well resulting in coolant often times leaking on the ground under your vehicle.
Remove the old gasket. You may need to use a paint scraper to remove all of the old gasket from the surface of the housing. Pinch the raised portion of the thermostat with your thumb and forefinger and pull the thermostat from its seat.
Raise the front of the Nissan with a floor jack and slide jack stands beneath the vehicle’s frame rails. Lower the truck until only the jack stands support its weight. Slide under the Nissan truck and locate the radiator drain plug under the lower radiator hose — the rubber hose on the bottom of the radiator.