How do you remove a clutch from an AC compressor?
Remove the air conditioning accessory belt with the proper size wrench in your wrench set. Disconnect the connector on your compressor’s magnetic coil. Use the right size socket to remove the 6 mm bolt in the center of the AC clutch. Pull the clutch off, and observe the spacers on the shaft behind it.
Why is the clutch on my AC not moving?
Because the clutch is attached to the compressor shaft, if it becomes disengaged, it will not move the compressor shaft. A few steps will help you remedy this problem.
How do you install a new AC clutch?
Insert the new pulley, and engage the snap-ring with the beveled edge facing outward. Install one spacer on the compressor shaft, then install the clutch, and fasten the 6 mm bolt securely. Place the feeler gauge between the clutch and the pulley to ensure proper clearance.
When does the AC compressor clutch spin freely?
Should AC Compressor Clutch Spin Freely? The AC compressor clutch can spin freely when fully disengaged. It will also spin freely when the compressor and the pulley are engaged. However, if the AC compressor clutch spins freely every time, and the compressor fails to turn on, it is an indicator that it is not engaging, and it required replacement.
What to do if your AC compressor clutch is broken?
If you don’t see obvious signs that the compressor clutch is broken, you can jump it for further diagnosis. Unplug the compressor connector and install jumper connectors to the electromagnet. You will need a wire crimp tool because the connectors are small. Route the wires to the car battery.
How to jump start an AC compressor clutch?
How to Jump AC Compressor Clutch 1 Disconnect Clutch Oil Cable. 2 Make Sure Compressor Have Sufficient Oil. 3 Set the Amount of Refrigerant. 4 Jump Start the Clutch. 5 Frequently Asked Questions (FAQs) How Do You Manually Engage AC Compressor Clutch?
What happens when the clutch on the Air Conditioner breaks?
However, it’s much more common for the clutch to break and make it impossible to turn on the air instead. Without the clutch, the compressor doesn’t receive any power from the engine, so you are left without air conditioning. When the compressor clutch breaks, the bearing inside the compressor can become damaged as well.
What should I do if my air conditioner clutch is spinning?
The clutch allows the compressor pulley to engage or disengage from the motor, ensuring it is only running when it should. If the clutch seizes, normal action cannot continue. Look at the front of the compressor while the air conditioning is running to see if the clutch is spinning.