How much torque does a 350Z flywheel have?
350Z/ G35 Flywheel Torque Spec: 62-68 ft-lbs wet *Z1 recommends the use of Loctite 271 or equivalent . 350Z / G35 Clutch Pressure Plate Torque Spec: Step 1 = 8-14 ft-lb, Step 2 = 26-32 ft-lb *use Loctite 271 or equivalent
What’s the torque spec on a Nissan flywheel?
1. Place flywheel on crank.2. Hand tighten flywheel bolts.3. Connect socket to impact wrench.4. Place end of socket/impact wrench assembly over flywheel bolts.5. Make impact wrench go “pppvvvvrrrrrgggghhghghg” several times until bolts are tight in a “criss-cross” pattern (like tightening lug nuts)6. Put transmission on and drive. KATwo40 wrote: 1.
How big is the thread on a flywheel bolt?
NOTE 1: All flexplate bolts listed below are Pro Series 200,000 psi rated bolts unless noted otherwise. NOTE 2: The thread size of metric fasteners is listed using international designations. For example, “M10” indicates a 10mm thread size. Didn’t find the kit you were looking for?
How much does a Z1 flywheel clutch weigh?
At the same time reducing the total weight of the clutch and flywheel assembly to 29.75 lbs vs 46.6 lbs stock. Z1 Motorsports Mild Performance Clutch – This kit utilizes a pressure plate built to OEM Spec clamping forces.
350Z/ G35 Flywheel Torque Spec: 62-68 ft-lbs wet *Z1 recommends the use of Loctite 271 or equivalent . 350Z / G35 Clutch Pressure Plate Torque Spec: Step 1 = 8-14 ft-lb, Step 2 = 26-32 ft-lb *use Loctite 271 or equivalent
1. Place flywheel on crank.2. Hand tighten flywheel bolts.3. Connect socket to impact wrench.4. Place end of socket/impact wrench assembly over flywheel bolts.5. Make impact wrench go “pppvvvvrrrrrgggghhghghg” several times until bolts are tight in a “criss-cross” pattern (like tightening lug nuts)6. Put transmission on and drive. KATwo40 wrote: 1.
NOTE 1: All flexplate bolts listed below are Pro Series 200,000 psi rated bolts unless noted otherwise. NOTE 2: The thread size of metric fasteners is listed using international designations. For example, “M10” indicates a 10mm thread size. Didn’t find the kit you were looking for?
At the same time reducing the total weight of the clutch and flywheel assembly to 29.75 lbs vs 46.6 lbs stock. Z1 Motorsports Mild Performance Clutch – This kit utilizes a pressure plate built to OEM Spec clamping forces.