How do you tighten the throttle valve cable?
Keeping the cable relaxed, push in the D button with a screwdriver. When the D button is pressed, the cable housing can be moved closer to the throttle bracket to tighten the cable or further away to loosen it. Note: Make sure that the gas pedal is not being depressed while you are making the adjustments.
How to adjust throttle valve on Ford truck?
TV CABLE LINKAGE 1. Attach a 100 psi pressure gauge to the TV port on transmission using enough flexible hose so that the gauge can be read while operating engine. See Figure 1. 2. If necessary, remove air cleaner cover and inlet tube from throttle body inlet. On light trucks and vans, remove protective cover from cable linkage, if equipped. 3.
When to back out throttle valve adjustment screw?
Remove gage block, allowing TV lever to return to idle. With engine still idling in Neutral, TV pressure must not be less than 5 psi. If not, back out adjustment screw until TV pressure is less than 5 psi, then reinstall gage block and ensure that TV pressure is still 28-38 psi. TV CABLE LINKAGE 1.
Where does the throttle valve cable come from?
Average rating from 123,882 customers who received a Adjust Throttle Valve Cable. Many cars with automatic transmissions use a mechanical cable that runs from the transmission to the throttle linkage. This throttle valve cable is responsible for controlling the throttle lever providing movement to the car.
How do I adjust the cable on my throttle valve?
Locate the Adjust Tab on the cable housing. Press in the tab and push the slider as shown in Figure 3. b. Release the tab and rotate the throttle lever to WOT and the cable will self adjust itself as evidenced by a few audible clicks. Release the throttle lever and check the cable for any signs of binding or sticking.
Where do you find the throttle linkage on a Honda Accord?
Step 2: Locate the throttle linkage. Before you can make any adjustments, you will need to locate the throttle valve adjustment location and the throttle linkage. Pop the hood and look for the intake piping. Follow the piping to the intake itself. You will find a series of linkages and cables mounted on the intake.
How does the throttle work on a golf cart?
The slack in the first cable at the accelerator pedal avoids the cable snapping at this end. The slack in the second cable causes the ignition to fire off, the engine to turn over or the accelerator stop switch to open before the throttle shaft in the carburetor opens up. This will in turn prevent backfiring.
What happens when the throttle valve cable is out of specification?
When the throttle valve cable is out of specification, the transmission can shift early, shift late or not shift at all. Before the throttle valve cable can be adjusted, the transmission must be in good working order. First, you will need to find out if the transmission is faulty or if the transmission just needs to be adjusted.
What is the tension method for General Cable?
General Cable and IEEE Standard 524 only recommend the tension method (Section 3.1) for the installation of ACSS and ACSS/TW as well as for any other multilayer transmission conductor construction, defined as having more than one layer of aluminum over the core or central wire. The following is a brief description of each of these methods.
How is a suspension bridge different from a cable stayed bridge?
The towers (piers) of a suspension bridge are in compression and the deck hangs from cables that are in tension. The deck itself is in both tension and compression. A cable-stayed bridge is similar to a suspension bridge. However, the deck hangs directly from the piers on cables.
What kind of cable does an automatic transmission use?
Many cars with automatic transmissions use a mechanical cable that runs from the transmission to the throttle linkage. This throttle valve cable is responsible for controlling the throttle lever providing movement to the car. The throttle valve cable is used to control the line pressure, downshifting and the feel of the shifting.
How to improve Pontiac V-8 performance, tuning guide?
You can copy and paste this link to share: https://www.pontiacdiy.com/how-to-improve-pontiac-v-8-performance-tuning-guide/ Engine tuning is a time-consuming process that’s required to achieve peak performance. It generally includes swapping carburetor jets and adjusting the distributor to advance or retard spark timing.
Which is the best advance curve for a Pontiac V-8?
A mechanical advance curve that provides 20 to 24 degrees of additional advance can provide the optimal amount of total spark lead required for peak performance. Some trial and error will be required to find the exact amount your Pontiac runs best with.
What kind of carburetor does a Pontiac use?
It’s an ideal carburetor for street drivers and can make an excellent street/strip carb so long as the vehicle’s fuel system is capable of keeping the centrally located float bowl full of fuel. Pontiac used the Quadrajet on engines ranging from 301 to 455 ci.
What kind of springs do I need for my Pontiac V-8?
The Adjustable Vacuum Advance kit from Crane includes a variety of advance-curve springs as well as a serrated limited plate and vacuum adjustment tool. It’s an excellent piece that’s ideal for tailoring vacuum advance to provide peak engine efficiency at idle and part throttle.