How do I reset maintenance light?
Turn your vehicle’s ignition to the “acc” setting while holding the button. Do not crank the vehicle. Hold the position for five seconds and turn the ignition key off. Release the button. The maintenance light will be reset and will illuminate again the next time service is due.
How do I Turn Off the maintenance required light on my Honda?
How to Turn Off the Maintenance Required Light on a Honda Civic. Put the key in the ignition. Press and hold the odometer reset knob. This is the knob that sticks out on the bottom right of the instrument cluster. While holding this button, turn the key to the “On” position, but do not start the engine.
What does the service code B1 mean on a Honda Civic?
The “B” represents an oil and filter change plus mechanical inspection, while the “1” means it’s time to have the vehicle’s tires rotated. When the Maintenance Minder system indicates that your fit needs B1 service, the service should include the following inspections, according to the Honda Fit ’s owner’s manual:…
How do I reset the required maintance light?
- Turn ignition switch to the ON position
- Trip Display to TRIP A mode
- Turn the ignition switch to the OFF position
- Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position.
How do I reset the maintance light?
Here’s how you do a maintenance light reset: Put your key in the ignition. Turn the key to position one. This is the position just before starting the car. Push the trip meter reset button on the dashboard. Hold it down for a second or two. Continue to hold the odometer button for around ten seconds. The light should flash, beep, and then go out. Once off, release the odometer button. Start your car.
What does the maintenance required light mean?
The maintenance required light just means that some sort of scheduled maintenance needs to be done. Most of the time it just means you need an oil/filter change. Your owner’s manual will list what maintenance is required based on your milage.