How do you loosen the belt on a power steering pump?
Loosen the locking bolt on the front of the power steering pump bracket with the ratchet and a socket. Unscrew the adjustment bolt on the end of the bracket with the ratchet and socket until the belt is loose. Pull the belt out of the power steering pump pulley and the crankshaft pulley.
How do I replace a 2005 Nissan Murano drive belt?
How Do I Replace a 2005 Murano Drive Belt? The 2005 Nissan Murano comes equipped with two different drive belts. The front belt controls the power steering pump and the water pump. The second belt controls the alternator and the air conditioner pump.
What is the name of the power steering belt?
In many cases, there is a single belt that powers all of these components, typically referred to as the serpentine belt (named this because of the snake-like pattern in which it is installed). On some vehicles, the power steering system has its own belt called the drive belt.
Can a power steering belt be removed without an alternator?
If this is the case, please refer to your vehicle’s manual and follow the instructions for removing the alternator belt. In most cases, you’ll only need to remove the belt and not the alternator to gain access to the power steering belt. Step 4: Locate the power steering pump.
How do you loosen a power steering belt?
In many cases, the power steering pump will be secured tight onto its housing, even with the bolts loosened. Use a pry bar or a long end wrench to apply pressure to the pump. This will loosen the belt even more so you can slide the belt off the pulleys.
In many cases, there is a single belt that powers all of these components, typically referred to as the serpentine belt (named this because of the snake-like pattern in which it is installed). On some vehicles, the power steering system has its own belt called the drive belt.
How to replace the drive belt on a Nissan Murano?
Loosen (Do not Remove) power steering oil pump mounting bolt (D). Note: The bolt head D) has to be access from the rear of the engine. 4. Loose the drive belt tension by turning adjusting bolt (E). 5. Remove drive belt. 6. With the power steering belt removed, proceed by replacing the alternator/AC belt. 7.
How can you tell if your steering belt is failing?
When the steering belt is failing, some of the most common symptoms include a squealing noise from under the hood when the engine starts, or visible cracks, cuts or nicks on the serpentine or drive belt.