How do I turn off the tire pressure light on Honda Civic?
Models with steering wheel buttons:
- Press MENU.
- Select Customize Settings.
- Select TPMS Calibration.
- Select Initialize.
- Select Yes.
- Press MENU to exit.
How do I turn my air pressure light off?
Drive the car at 50 mph for about 10 minutes.
- Drive the car at 50 mph for about 10 minutes. This should reset the sensor, and the next time you start the car the TPMS light should be off.
- Without starting the car, turn the key to the “On” position.
Why won’t my air pressure light go off?
If you’ve inflated your tires to the proper air pressure, but the warning light stays on, you may have a leak or there’s a problem with the TPMS in one or more of your tires. It’s simple enough to check if there’s a leak in a tire. Just use your tire gauge to recheck the air pressure in all your tires.
Will tire pressure light go off on its own Honda Civic?
In theory, the tire pressure light should go off on its own. The tire pressure monitor reset button is usually located beneath the steering wheel. If you can’t find it, check your user’s manual. Inflate all tires to 3 PSI over their recommended amount, then deflate them completely.
Why is the low pressure light still on on my Honda Civic?
For the 2013 Honda Civic, inflate your tires to the specified PSI on the driver’s side door jamb. The low pressure light will turn off on it’s own after driving. If the low pressure light is still on after driving and/or there is a TPMS warning on the i-MID (screen on the dashboard), then there may be something wrong with the system.
How to reset tire pressure light on Honda Civic?
If you have a fancy color screen: Turn the car to the ON position (double click start button w/o pressing brake or turn key to ON) Touch the information button on the steering wheel, then press the audio remote button to select the VEHICLE SETTINGS. Press the audio remote button to select TPMS CALIBRATION.
Where is the tire pressure sensor on a Honda Civic?
If your vehicle has information display, so you need just to follow first four points and then locate and press the “ TPMS button “. Then just wait the TPMS or low tire pressure light blinks twice. Completely stop your vehicle. Check the tire pressure. Choose the specific pressure level. The specified tire pressure is located on the door panel.
Where is the TPMS light on a Honda Civic?
Press and hold the TPMS switch on the dash to the left of the steering wheel for 3 seconds. When the calibration successfully begins, the TPMS light on the dash blinks twice. Drive the car 26 MPH or faster in a straight line and verify the light goes out. Image courtesy of American Honda Motor Corp.
For the 2013 Honda Civic, inflate your tires to the specified PSI on the driver’s side door jamb. The low pressure light will turn off on it’s own after driving. If the low pressure light is still on after driving and/or there is a TPMS warning on the i-MID (screen on the dashboard), then there may be something wrong with the system.
If you have a fancy color screen: Turn the car to the ON position (double click start button w/o pressing brake or turn key to ON) Touch the information button on the steering wheel, then press the audio remote button to select the VEHICLE SETTINGS. Press the audio remote button to select TPMS CALIBRATION.
Press and hold the TPMS switch on the dash to the left of the steering wheel for 3 seconds. When the calibration successfully begins, the TPMS light on the dash blinks twice. Drive the car 26 MPH or faster in a straight line and verify the light goes out. Image courtesy of American Honda Motor Corp.
When to reset the Check Engine light on Honda Civic?
Continue reading to learn how to reset this light and save yourself the dealership cost. This article applies to the Honda Civic (1992-2000), and Accord (1990-2002). The check engine light in your Honda offers important diagnostic information, which will alert you of a serious problem like a bad catalytic converter.