When does Nissan p0507 idle air control system raise?
In this case, the P0507 Nissan DTC (diagnostic trouble code) is triggered when the PCM (powertrain control module) detects an engine idle speed that is greater than the desired (pre-programmed) RPM. In the case of GM vehicles (and possibly others) if the idle speed is over 200 rpm higher than expected, this code will be set.
What does DTC stand for on Nissan p0507?
They rely on sensors and electronics to control the throttle. In this case, the P0507 Nissan DTC (diagnostic trouble code) is triggered when the PCM (powertrain control module) detects an engine idle speed that is greater than the desired (pre-programmed) RPM.
How does the idle speed control system work?
The Engine Control Module ( ECM) controls the engine idle speed to a specified level through the fine adjustment of the air, which is let into the intake manifold, by operating the electric throttle control actuator. The operating of the throttle valve is varied to allow for optimum control of the engine idling speed.
How much does it cost to repair a Nissan p0507?
Please try again later. The cost of diagnosing the P0507 NISSAN code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
In this case, the P0507 Nissan DTC (diagnostic trouble code) is triggered when the PCM (powertrain control module) detects an engine idle speed that is greater than the desired (pre-programmed) RPM. In the case of GM vehicles (and possibly others) if the idle speed is over 200 rpm higher than expected, this code will be set.
They rely on sensors and electronics to control the throttle. In this case, the P0507 Nissan DTC (diagnostic trouble code) is triggered when the PCM (powertrain control module) detects an engine idle speed that is greater than the desired (pre-programmed) RPM.
What is the idle control code on a Nissan Murano?
This Nissan Murano had a code P0507 after performing other repairs and cleaning out the throttle body.
What to do when ECM says p0507 trouble code?
At a certain point, the ECM can no longer compensate and sets a P0507 trouble code. You must remove the electronic throttle body to clean it. Apply throttle body cleaner to a clean rag and wipe the carbon off the throat and throttle plate.
What does the p0507 Nissan ECM code mean?
P0507 NISSAN Meaning The Engine Control Module (ECM) controls the engine idle speed to a specified level through the fine adjustment of the air, which is let into the intake manifold, by operating the electric throttle control actuator. The operating of the throttle valve is varied to allow for optimum control of the engine idling speed.
When to set the p0507 diagnostic trouble code?
In this case, the P0507 DTC (diagnostic trouble code) is triggered when the PCM (powertrain control module) detects an engine idle speed that is greater than the desired (pre-programmed) RPM. In the case of GM vehicles (and possibly others) if the idle speed is over 200 rpm higher than expected, this code will be set.
Please try again later. The cost of diagnosing the P0507 NISSAN code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
The Engine Control Module ( ECM) controls the engine idle speed to a specified level through the fine adjustment of the air, which is let into the intake manifold, by operating the electric throttle control actuator. The operating of the throttle valve is varied to allow for optimum control of the engine idling speed.
What are the possible causes of a p0507 Nissan?
P0507 NISSAN Possible Causes 1 Dirty throttle body 2 Electric throttle control actuator misadjusted or damaged 3 Faulty Electric throttle control actuator 4 Intake air leak 5 Poor electrical connection to the Intake Air Control (IAC) valve
Why does my DTC p0507 have idle speed control?
Depending on year, make, and model, DTC P0507 may have number of causes. Here are some of the most common. ECU Update – Newer vehicles, particularly those with drive-by-wire electronically-controlled throttle bodies, may not be equipped with an individual IAC, but use the main throttle valve to maintain idle speed.
What does code p0507 mean on IAC system?
If you are having a problem with the IAC system, and the MIL is on, you may also notice the engine idling unusually high, or erratically idling high and low. You may also experience hard engine starting. How do you troubleshoot code P0507 ?
P0507 NISSAN Meaning The Engine Control Module (ECM) controls the engine idle speed to a specified level through the fine adjustment of the air, which is let into the intake manifold, by operating the electric throttle control actuator. The operating of the throttle valve is varied to allow for optimum control of the engine idling speed.