How do you get CVT fluid out of a Nissan Rogue?
Insert the tip of an air gun into the end of the cooler outlet hose. Wrap a shop rag around the air gun tip and end of the cooler outlet hose. Blow compressed air regulated to 5 to 9 kg/cm2 (70 to 130 psi) through the cooler outlet hose for 10 seconds to force out any remaining CVT fluid.
What to use to clean transmission cooler in Nissan Rogue?
Insert the extension adapter hose of a can of Transmission Cooler Cleaner (Nissan P/N 999MP-AM006) into the cooler outlet hose. Wear safety glasses and rubber gloves when spraying the Transmission Cooler Cleaner. Spray Transmission Cooler Cleaner only with adequate ventilation. Avoid contact with eyes and skin.
Why does my Nissan Rogue have a CVT problem?
My car had 118,000 miles. Two years later, and only 20,000 miles since the 2014 CVT replacement, Nissan found the noises we are experiencing during acceleration and deceleration as well as the rough shifting is due to a failing CVT (AGAIN!).
How do you get CVT fluid out of a transmission cooler?
Hold the hose and can as high as possible and spray Transmission Cooler Cleaner in a continuous stream into the cooler outlet hose until CVT fluid flows out of the cooler inlet hose for 5 seconds. Insert the tip of an air gun into the end of the cooler outlet hose. Wrap a shop rag around the air gun tip and end of the cooler outlet hose.
Insert the tip of an air gun into the end of the cooler outlet hose. Wrap a shop rag around the air gun tip and end of the cooler outlet hose. Blow compressed air regulated to 5 to 9 kg/cm2 (70 to 130 psi) through the cooler outlet hose for 10 seconds to force out any remaining CVT fluid.
Insert the extension adapter hose of a can of Transmission Cooler Cleaner (Nissan P/N 999MP-AM006) into the cooler outlet hose. Wear safety glasses and rubber gloves when spraying the Transmission Cooler Cleaner. Spray Transmission Cooler Cleaner only with adequate ventilation. Avoid contact with eyes and skin.
Hold the hose and can as high as possible and spray Transmission Cooler Cleaner in a continuous stream into the cooler outlet hose until CVT fluid flows out of the cooler inlet hose for 5 seconds. Insert the tip of an air gun into the end of the cooler outlet hose. Wrap a shop rag around the air gun tip and end of the cooler outlet hose.