What can cause a P2138 code?
Diagnostic trouble code (DTC) P2138 stands for “Throttle/Pedal Position Sensor/Switch D/E Voltage Correlation.” It is triggered when the vehicle’s engine control module (ECM) or powertrain control module (PCM) detects that the signals from the two throttle position sensors (or two accelerator pedal position sensors) do …
What is the Nissan Versa code p2138 code?
All tested well. replaced… 2007 nissan versa code P2138 ran the diagnostic trouble tree.. All tested well. replaced APP sensor same issue, had noticed app sensor 1 and app sensor 2 are reading the same voltage .7v off throttle 4.5v depressing throttle.
What’s the diagnostic code for a Nissan Versa?
2007 nissan versa code P2138 ran the diagnostic trouble tree.. All tested well. replaced APP sensor same issue, had noticed app sensor 1 and app sensor 2 are reading the same voltage .7v off throttle 4.5v depressing throttle. APP sensor 2 should be 0.3-0.6v off throttle from the info i have on identifix. 1.95-2.4v on throttle drepessed.
What was the cause of the Nissan p2138 accident?
P2138 NISSAN Possible Causes 1 Faulty Accelerator Pedal Position Sensor 2 Accelerator Pedal Position Sensor harness is open or shorted 3 Accelerator Pedal Position Sensor circuit poor electrical connection 4 Faulty Electric Throttle Control Actuator
What are the causes of a p2138 code?
P2138 causes can include: 1 A failing, faulty, or dirty APP or TP sensor 2 A faulty, bad, loose, or disconnected APP or TP sensor connector 3 Faulty or damaged APP or TP sensor wiring or circuits 4 Incorrect dielectric grease used on the APP or TP sensor connector 5 A computer issue
All tested well. replaced… 2007 nissan versa code P2138 ran the diagnostic trouble tree.. All tested well. replaced APP sensor same issue, had noticed app sensor 1 and app sensor 2 are reading the same voltage .7v off throttle 4.5v depressing throttle.
2007 nissan versa code P2138 ran the diagnostic trouble tree.. All tested well. replaced APP sensor same issue, had noticed app sensor 1 and app sensor 2 are reading the same voltage .7v off throttle 4.5v depressing throttle. APP sensor 2 should be 0.3-0.6v off throttle from the info i have on identifix. 1.95-2.4v on throttle drepessed.
What does the p2138 code in engine control mean?
What the P2138 code means The P2138 trouble code indicates that the Engine Control Module has detected a malfunction within the D and/or E circuits of the throttle position sensor. What are the causes of the P2138 code? A defective throttle body motor
What to do if your p2138 is not working?
Use the scanner to retrieve all stored trouble codes and write them down for future reference. You may also want to keep any related freeze frame data. Your notes may prove helpful if the P2138 is intermittent. Clear the codes and test drive the vehicle. If the code is reset, continue with the diagnosis.