How do you reset the airbag light on a Nissan nv200?
How to Reset The Airbag Status Light On A Nissan
- Insert the key into the ignition and turn the key to ON.
- Notice that the light will stay on and then start blinking.
- Wait 5 seconds.
- Wait 5 seconds and repeat step 1.
- When you are complete, you should have inserted the key and removed it for a total of 6 times.
Why is the airbag status light not blinking?
If you have recently installed a new stereo or removed the seats in your Nissan, you may have noticed the airbag status light will not stop blinking. There is a simple fix for this that will keep you from having to take it to the dealer.
Do you clear trouble codes before resetting airbag light?
Do never clear the trouble codes before you fix the problem caused by the airbag light. Read the codes and get information about what can cause the problem and therefore continue the diagnosis. You should never just reset the airbag light without repairing the problem.
Do you need scanner to read airbag trouble codes?
Working with your airbag system is crucial, and therefore, always read the trouble codes with an OBD2 scanner to get an idea of where to start your troubleshooting. Do never clear the trouble codes before you fix the problem caused by the airbag light.
How to reset the airbag status light on a Nissan?
Step 1 Insert the key into the ignition and turn the key to ON. Notice that the light will stay on and then start blinking. After turning the key to ON, wait until the light turns to off, to start the blinking process, and then switch the key OFF and remove the key. Wait 5 seconds. Stick the key back in the ignition and repeat step 1.
What should I do if my airbag warning light is not working?
You’ll need to reset the airbag light in this case. There’s no quick and easy way to troubleshoot the problem of an airbag warning light. Much like the Check Engine light, it should not be ignored and needs to be looked at by a professional. In this case the mechanic will run a diagnostic on the airbag ECU, or electronic control unit.
How can I tell if my airbag is off in my car?
All affected cars will eventually need service, but you can tell if there’s a problem right now from your car’s passenger-side airbag indicator light. That’s a yellow dashboard light that typically comes on to indicate that the airbag is off because it senses some, but not enough, weight in the passenger seat.
Working with your airbag system is crucial, and therefore, always read the trouble codes with an OBD2 scanner to get an idea of where to start your troubleshooting. Do never clear the trouble codes before you fix the problem caused by the airbag light.
How to reset the airbag light on a Nissan Versa?
Watch the airbag light closely. It will stay on for a few secs. and then as soon as it blinks off (the start of the flashing), turn the key off instantly. 3. Count to 5 (1 Mississippi, 2 Mississippi . . . .) 4. Repeat steps 1-3 two more times until you have done the cycle three times. 5. Now turn the key on and watch the light.