What does TP mean on a car radio?
Traffic information
Updated 7/23/2018. This function allows traffic information that is broadcast within a set radio station’s RDS network to break through. The TP symbol indicates that the function is activated.
What is a TA interrupt?
Traffic announcement (TA) refers to the broadcasting of a specific type of traffic report on the Radio Data System. The RDS-enabled receiver can be set to pay special attention to this TA flag and e.g. stop the tape/pause the CD or retune to receive a Traffic bulletin.
How often does your car forget daylight savings setting?
About 90% of the time, the daylight savings setting and radio station (or CD track, etc) is forgotten the next trip. Maybe 10% of the time it will actually remember the settings and use those for the next 8-10 trips until the next random time it decides to save our clock/radio settings when shutting off the car.
What happens when the service vehicle soon light goes out?
He cleared faults and the service vehicle soon light went out and the car started to feel normal. Took it out reset the car the light was still gone. Thought itd test it out and getting to 40 in 2nd (thought I’d push it) the car then goes into limp mode again and a few seconds later the service vehicle soon comes up on the display.
How can I keep the radio on when the car is off?
The “always on” line always has power available on it. This is what would ensure that the settings in the radio stay on when the car is off. If you have connected two power leads to the radio, you may have reversed them. If you only connected one, you probably also need to connect another one that is from a line that is always powered.
How to turn the radio off on off?
Turn radio off on off on many times. Put the truck in reverse with the camera showing change a radio station or turn itnoff. Lock and unluck the truck with the remote many times.
What happens when you turn off the memory saver on a car?
In short, the connector plugs into the car’s cigarette lighter or the (OBD-II) connector. The memory saver tool incorporates a diode on the positive side. A diode is essentially a one-way valve for electricity. It stops the electricity from flowing backwards causing damage. Always turn off the car; before disconnecting the battery.
He cleared faults and the service vehicle soon light went out and the car started to feel normal. Took it out reset the car the light was still gone. Thought itd test it out and getting to 40 in 2nd (thought I’d push it) the car then goes into limp mode again and a few seconds later the service vehicle soon comes up on the display.
What to do if your car loses power?
Was driving my car down the motorway and the car lost power and now feels like the turbo will not kick in. The service soon displayed on the screen immediately after. 24 hours later the issue is still there and was wondering if this is due to a lot of stop start/ slow traffic. Any help will be appreciated.
About 90% of the time, the daylight savings setting and radio station (or CD track, etc) is forgotten the next trip. Maybe 10% of the time it will actually remember the settings and use those for the next 8-10 trips until the next random time it decides to save our clock/radio settings when shutting off the car.