Are there any problems with Nissan Altima windows?
While the Altima boasts beauty, functionality and high reliability, its window controls are sometimes subject to various problems. Most newer models of the Altima use power windows, which are automatic window rollers that work via push button and remote control technology.
Can a Nissan Altima window regulator be repaired?
In turn, passengers are subject to certain risks such as medical emergencies which could be prevented if they had the ability to manually control the windows. The Nissan Altima’s window regulators are typically repaired by replacing parts as opposed to repairing the existing parts.
Why does my Nissan power window go up?
When attempting to close the window using the “auto” feature, if work has been performed that results in the loss of the limit switch setting, the power window will rise all the way to the top and then come back down several inches.
Why does the passenger side window not work?
The red / light blue is a different story. That is the 12-volt feed only for when the passenger switch is pressed. It is not used when the driver’s switch is pressed. This is why I suspect you have two problems, since the window doesn’t work from either switch.
Are there any recalls on the Nissan Altima?
Nissan has responded to the power window issue as a design flaw, and because of this, they have provided recalls to Altima owners who are suffering from the said defect.
How do you close a window on a Nissan?
1. Push the ignition switch to the ON position. 2. Close the door. 3. Open the window more than halfway by operating the power window switch. 4. Pull the power window switch and hold it to close the window, and then hold the switch for more than 3 seconds after the window is closed completely. 5.
What to do when passenger side window won’t roll up?
6) Tried the passenger side regulator on drivers side. Doesn’t work. 7) Tried the three second reset with window half down and then raise fully up and hold for three seconds – this has to be done on passenger side with switch and regulator and then plugged in on drivers side. No difference.