How to remove power steering gear from 1994 Nissan?
Support the transaxle with a suitable transmission jack and remove the exhaust pipe and rear engine mounts. Remove the lower joint assembly from the steering gear pinion. Before disconnecting the lower ball jointset the steering gear assembly in neutral by making the wheels straight.
How do you clean a power steering rack?
Remove and strip the steering rack as per the workshop manual. Clean everything thoroughly, except the pinion and valve assembly- just blow any fluid out with compressed air. You don’t want solvent or dust getting in there. Check everything for wear, especially the rack where it passes through the seals- it should be clean and undamaged.
How do you remove steering gear from a car?
Uncouple the outer sockets and steering knuckles. Keep a drain pan underneath the steering gear when you remove the hoses. Disconnect both hoses and plug them to avoid contamination. Find the bolt connecting the steering gear to the lower steering shaft and remove it. Remove the gear mounting nuts and your steering rack is ready to pull.
Can You disconnect a rack and pinion steering assembly?
Disconnect the steering joint between the steering column and rack and pinion assembly. Do not allow the column or wheel to turn while the joint is disconnected. The image above shows a steering universal coupler on the left and a rag joint on the right. I’m pointing to what is called a pinch bolt in the image on the left.
What’s the best way to replace a steering rack?
First, place a drain pan underneath the area. Disconnect the power steering supply and return lines using a line wrench and let them drain into the drip pan below the vehicle. Once the two lines have been disconnected, let the oil drain completely from the steering rack gearbox. Step 7: Remove the driver and passenger side brackets.
Support the transaxle with a suitable transmission jack and remove the exhaust pipe and rear engine mounts. Remove the lower joint assembly from the steering gear pinion. Before disconnecting the lower ball jointset the steering gear assembly in neutral by making the wheels straight.
How is the steering rack gearbox connected to the wheels?
The steering rack gearbox is connected to the wheels and tires, the steering rack bushings and brackets and other components on the vehicle. In order to remove this component, you’ll have to first remove the ancillary parts connected to the steering rack gearbox.
Disconnect the steering joint between the steering column and rack and pinion assembly. Do not allow the column or wheel to turn while the joint is disconnected. The image above shows a steering universal coupler on the left and a rag joint on the right. I’m pointing to what is called a pinch bolt in the image on the left.