How do you change the front shocks on a Honda Civic?

How do you change the front shocks on a Honda Civic?

1. Step 1 – Lift the car.
2. Step 2 – Remove the damper pinch bolt.
3. Step 3 – Remove the damper fork bolts.
4. Step 4 – Remove the strut tower mounting bolts.
5. Step 5 – Remove the strut tops (if applicable)
6. Step 6 – Install the new shock/strut assembly.
7. Step 7 – Remove the rear lower shock/strut bolt.

Are there rear struts on a Honda Civic?

There is no need to worry about the rear as there are not actual “struts” mounted for the rear wheels, only a straight axle, coil springs and shocks. Be careful to mount the new struts in place exactly as the old ones were. It can be helpful to mark bolt locations with a wax pencil to make sure you remount them correctly.

How do you replace shocks on a Honda Civic?

Remove the 14mm pinch bolt from the damper. Locate the two damper fork bolts that connect the damper fork to the lower control arm. With your socket and ratchet, remove the two 17mm damper fork bolts. Pull down on the damper fork, and away from the bottom strut. Repeat this step on the other side.

How do you remove a strut from a car?

Pull the wheel off and then use the socket wrench to remove the lower mounting nut on the bottom of the A-arm. Pop the hood of the car and use the socket wrenches to remove the mounting bolts for the top of the strut in the corner of the engine compartment above the A-Arm. Slide the old strut out of the bottom of the A-arm and set it aside.

How do you attach a strut to a floor?

Place the bottom strut into the damper fork, and secure it with the damper pinch bolt. Connect the damper fork to the lower control arm using the damper fork bolts. You may need the floor jack to raise the control arm to line up the bolt holes. Repeat this step on the other side.

How much does it cost to replace a Honda Civic strut?

The average cost for a Honda Civic suspension shock or strut replacement is between $727 and $800. Labor costs are estimated between $282 and $356 while parts are priced at $444. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

Remove the 14mm pinch bolt from the damper. Locate the two damper fork bolts that connect the damper fork to the lower control arm. With your socket and ratchet, remove the two 17mm damper fork bolts. Pull down on the damper fork, and away from the bottom strut. Repeat this step on the other side.

Why do Honda Civics use shock absorbers instead of struts?

Additionally, vehicles using shock absorbers instead of struts will have the shock mounted to the chassis and the lower control arm. This allows the shock absorber to moderate the movement of the coil spring, preventing the vehicle from bouncing up and down indefinitely. What are the symptoms of a bad Suspension Shock or Strut?

Pull the wheel off and then use the socket wrench to remove the lower mounting nut on the bottom of the A-arm. Pop the hood of the car and use the socket wrenches to remove the mounting bolts for the top of the strut in the corner of the engine compartment above the A-Arm. Slide the old strut out of the bottom of the A-arm and set it aside.