How to time KA24E distributor?
You need to find Top Dead Center (TDC) for the compression stroke in order to time the ignition distributor. To find TDC, remove #1 spark plug. Have someone tap the ignition switch start position to slowly crank the motor while you put your hand or thumb over the spark plug hole. When you feel the compression, stop.
How to advance timing on nissan hardbody?
Warm the engine up to operating temperature. Disconnect the TPS. Loosen bolts on distributor and turn. Nissan says to set it at 10 degrees BTDC with a timing light.
How do you change the timing on a Nissan KA24E?
To fix this, the timing requires adjustment, which is easily accomplished by the home mechanic using a timing light. Open and secure the Nissan hood to access the engine. Clean the timing degree notches, which are located near the crank shaft pulley. Wipe off any built-up grease with a rag. Connect the timing light.
What is the rev limiter on a Nissan KA24E?
The intake valve duration is 240°, valve lift is 10.4 mm (0.409 in); the exhaust valve duration is 248°, valve lift is 10.4 mm (0.409 in). The KA24E rev limiter is set on 6,500 rpm. The Nissan KA24E engine version for SUV uses a camshaft with duration 232°/232°, and valve lift 9.7/9.7 mm. For this engine, redline is lowered to 6,000 rpm.
How big is the intake valve on a Nissan KA24E?
Intake valves are 34.0 mm (1.34 in) in diameter and the exhaust valves are 40.0 mm (1.57 in). The intake valve duration is 240°, valve lift is 10.4 mm (0.409 in); the exhaust valve duration is 248°, valve lift is 10.4 mm (0.409 in). The KA24E rev limiter is set on 6,500 rpm.
To fix this, the timing requires adjustment, which is easily accomplished by the home mechanic using a timing light. Open and secure the Nissan hood to access the engine. Clean the timing degree notches, which are located near the crank shaft pulley. Wipe off any built-up grease with a rag. Connect the timing light.
The intake valve duration is 240°, valve lift is 10.4 mm (0.409 in); the exhaust valve duration is 248°, valve lift is 10.4 mm (0.409 in). The KA24E rev limiter is set on 6,500 rpm. The Nissan KA24E engine version for SUV uses a camshaft with duration 232°/232°, and valve lift 9.7/9.7 mm. For this engine, redline is lowered to 6,000 rpm.
Intake valves are 34.0 mm (1.34 in) in diameter and the exhaust valves are 40.0 mm (1.57 in). The intake valve duration is 240°, valve lift is 10.4 mm (0.409 in); the exhaust valve duration is 248°, valve lift is 10.4 mm (0.409 in). The KA24E rev limiter is set on 6,500 rpm.