What do I need to take off to replace the bearings on my car?
Raise and support the vehicle safely. Remove the tire and wheel assembly. Move the wheel hub in the axial direction by hand. Make sure that there is no looseness of the wheel bearing. Axial end play should be 0.002 inch or less. Rotate the wheel hub and make sure there is no unusual noise or other irregular conditions.
How to replace carrier bearing on Nissan Frontiers?
This how-to will discuss replacing the U-joints and carrier bearing on Frontiers with the split driveshaft set-up. Step 1: Support truck on all four jack stands using floor jack, then release the parking brake and place transmission in neutral. This allows the driveshaft to spin freely making it easier to work on.
How do you find a bad front wheel drive bearing?
A trick to locate a bad bearing on a front wheel drive car is to raise the front of the vehicle so the wheel are not touching the ground. While placing your hand on the coil spring spin the wheel rapidly.
What happens when you change your wheel bearings?
As with most types of auto maintenance, you’ll want to take all necessary precautions when changing your vehicle’s wheel bearings to ensure your safety. The worst thing that can happen when changing your wheel bearings is for your vehicle to suddenly shift or roll away. Before you begin, park your vehicle on a level surface.
This how-to will discuss replacing the U-joints and carrier bearing on Frontiers with the split driveshaft set-up. Step 1: Support truck on all four jack stands using floor jack, then release the parking brake and place transmission in neutral. This allows the driveshaft to spin freely making it easier to work on.
Raise and support the vehicle safely. Remove the tire and wheel assembly. Move the wheel hub in the axial direction by hand. Make sure that there is no looseness of the wheel bearing. Axial end play should be 0.002 inch or less. Rotate the wheel hub and make sure there is no unusual noise or other irregular conditions.
Where can I get wheel bearings replaced in my Subaru?
Brakes and rotor assemblies are removed first to expose the axle nut and hub assembly. The old bearings are removed and replaced with new units and then reassembled. A certified mechanic at your dealership service department or at a local automotive repair center can do the replacements.
How much does it cost to replace wheel bearings?
It may also be evident by a vibration that travels up your steering wheel. The longer you drive on failing bearings, the more expensive the damage to your vehicle can be. Depending on the vehicle and its front, rear or all-wheel-drive, repairs can be quite involved.