How do you install an air conditioner in a Honda Civic?
Connect the receiver line B to the evaporator with one 6 x 25mm bolt. Route receiver line C under the wire harness. Connect the suction line B to the evaporator with one 6 x 25mm bolt. Push the radiator back, and mount the receiver lines to the pre-installed clips on the front wall of the engine bay.
Where is the AC system on a Honda Accord?
Review the manufacturer’s specifications and operating manual for your Honda Accord. It will help you locate the AC system under the hood, specifically the low pressure valve for the AC system, and to confirm the optimal AC system pressure recommended for your vehicle. Figure 1. Review information on AC System in your Owner’s Manual.
Why does my Honda Civic air conditioner keep blowing hot air?
Video Description When the air conditioner in your 2001 Honda Civic starts blowing hot air, you likely have a freon leak. Recharging the freon in your AC system is an inexpensive and easy first step to restoring the cooling capacity of your A/C system.
How to add Freon to a 2001 Honda Civic?
How to add freon to your 2001 Honda Civic: hook up the can of refrigerant (likely r-134a) to the low pressure port. When your compressor kicks on, add freon to the correct pressure. In addition to cooling, freon lubricates the compressor when it runs. Advance Auto coupon for 20% off entire order: KIOSK20
Connect the receiver line B to the evaporator with one 6 x 25mm bolt. Route receiver line C under the wire harness. Connect the suction line B to the evaporator with one 6 x 25mm bolt. Push the radiator back, and mount the receiver lines to the pre-installed clips on the front wall of the engine bay.
How do you replace a / C compressor on Honda Civic?
With a torque wrench, tighten the idler pulley center nut to 33 ft lbs (refer to Figure 2). Replace the O-rings of the pressurized charge line and condenser hose connectors. Reconnect the hoses to the compressor and secure them with the two 10mm bolts. Take the car back to an auto shop and have them properly refill the refrigerant.
Where is the condenser on a Honda Civic?
From inside the engine bay, locate the pressurized charge line and condenser hoses connected to the top of the compressor. With a 10mm socket and ratchet, remove the hose connectors along with the hoses. Disconnect the electrical connector on top of the compressor.
How to add freon to your 2001 Honda Civic: hook up the can of refrigerant (likely r-134a) to the low pressure port. When your compressor kicks on, add freon to the correct pressure. In addition to cooling, freon lubricates the compressor when it runs. Advance Auto coupon for 20% off entire order: KIOSK20
Where is the a / C receiver / drier located?
The receiver/drier is located between the located on the high-pressure side of the A/C system between the condenser and evaporator. Step 1: Have the refrigerant recovered by a professional. Before the receiver/drier can be replace, the A/C refrigerant must be removed from the system.
What are the signs of a failed a / C drier?
Signs of a failed receiver/drier include desiccant in the A/C system, moisture in the system, ice build up on the receiver/drier or a temperature drop between the unit inlet and outlet. In order to safely and efficiently replace your A/C receiver/drier you need a couple of basic tools: Step 1: Locate the receiver/drier.
Where is the drier on an air conditioner?
The receiver/drier is located between the located on the high-pressure side of the A/C system between the condenser and evaporator.
Review the manufacturer’s specifications and operating manual for your Honda Accord. It will help you locate the AC system under the hood, specifically the low pressure valve for the AC system, and to confirm the optimal AC system pressure recommended for your vehicle. Figure 1. Review information on AC System in your Owner’s Manual.
Signs of a failed receiver/drier include desiccant in the A/C system, moisture in the system, ice build up on the receiver/drier or a temperature drop between the unit inlet and outlet. In order to safely and efficiently replace your A/C receiver/drier you need a couple of basic tools: Step 1: Locate the receiver/drier.
When to replace an A / C receiver drier?
Receiver/driers are used in expansion valve equipped A/C systems. It is the job of the receiver/drier to protect the rest of the A/C system against moisture damage. The desiccant bag can only hold a finite amount of moisture. If too much water gets into the system, the receiver/drier should be replaced.
How much does it cost to replace AC compressor in Honda Civic?
Honda Civic Car AC Compressor Replacement costs $1376 on average. Following is a breakdown of the labor and parts estimates. What is the AC Compressor all about? An AC system has many components: compressor, condenser, receiver dryer, evaporator, and hoses.
Which is part of the Honda Civic a / C system?
Honda Civic 2006, A/C Condenser by ReplaceĀ®. The condenser is part of the A/C system. It receives the hot, high-pressure gaseous refrigerant from the compressor and cools it to a warm liquid state, although still under high pressure…. Honda Civic 2006, A/C Condenser by K-MetalĀ®. The condenser is part of the A/C system.
What to do if your Honda AC is not working?
Ac not working in your Honda well this video will guide you on most Honda’s , from changing the compressor, condenser and charging, how to tell if your compressor is working, and checking your ac fan.
How much does it cost to repair Honda Civic AC?
Honda Civic Car AC Repair costs $240 on average. For an AC system to work, it needs a gas or liquid substance called refrigerant (R-12 in older cars, R-134a in 1995 and newer cars). Over time, refrigerant can leak from the AC system through seals.
How to replace condenser on Honda Civic 10th gen?
To avoid this, cancel and sign in to YouTube on your computer. An error occurred. Please try again later. (Playback ID: aUjG2v42OWM42N2g) An error occurred while retrieving sharing information. Please try again later.
Ac not working in your Honda well this video will guide you on most Honda’s , from changing the compressor, condenser and charging, how to tell if your compressor is working, and checking your ac fan.