What should I do if I see the tyre pressure warning light?
The TPMS system lets you know so that you can address the situation as soon as possible, as failure to do so may result to you driving in dangerous conditions. Need Replacement Tyres? What should I do if I see the tyre pressure warning light? The first thing to do is to gently reduce your speed.
How does a low tire pressure light work?
The TPMS (or Tire Pressure Monitoring System) uses sensors on the vehicle to determine when a tire has low pressure and alerts the driver with a warning light so the tires can be checked out.
When to check tire pressure with the TPMS?
While every time you start the car and the pressure light turns on and stays lighted, this means the TPMS is not functioning properly. However, before consulting the mechanic regarding this issue, do check the tire pressure. If the tire pressure is fine, the TPMS needs to be repaired. 2. Extreme Cold Weather
What does it mean when your TPMS warning light is on?
So check your tires carefully. If your vehicle has a TPMS, it’s probably monitoring the pressure in your spare tire. Therefore, if you get a low tire pressure warning light, and if you’ve checked all four tires that are touching the ground, than you might need to put some air in the spare.
Why does check tire pressure light keeps coming on?
When the tire pressure monitoring system (TPMS) light on your dash comes on, it usually means that the air pressure in one or more of your tires has dropped below the expected level. The light can also be triggered erroneously by a bad sensor , and it can also come on, and go back off, seemingly at random.
How do I check the tire pressure?
Briefly press the small dot or bead on the back of the tire pressure gauge into the center of the valve stem on the tire. You should hear the air escaping the tire. Use the gauge to check the tire pressure.
What does the tyre pressure warning light actually mean?
The purpose of the TPMS ( Tire Pressure Monitoring System) is to alert you when tire pressure is too low and could create unsafe driving conditions. If the light is illuminated, it means your tires could be underinflated, which can lead to undue tire wear and possible tire failure.
What to do when the tire pressure light is flashing?
For most cars, all you need to do are the following: Put your vehicle key in the ignition to turn the battery on. Push the TPMS reset button until you see a flashing tire pressure light, which usually appears after approximately three seconds. Start your vehicle. Drive for about 20 to 25 minutes. Turn your car’s ignition off.