How do you remove the door panel on a Honda Civic?
Set the blade of the flat-head screwdriver on the inside of the interior door handle, in the seam around the square panel inside the handle. Pop off the panel using the flat-head screwdriver, then remove the two screws underneath using the Phillips-head screwdriver.
How do you remove window molding from Honda Civic?
Once all five clips have been released, the molding can now be removed from the door panel. Simply lift the molding from the latch side, starting from the side closest to the side view mirror. All five clips should still be attached to the molding when removed. Then slide the clips out through one end of the molding.
How do you remove a power window from a car?
Unplug the power-lock switch and set the handle to the side. Set the blade of the flat-head screwdriver between the armrest and the door panel, then use the tool to pop off the armrest cover. Remove the Phillips-head screws underneath using the Phillips-head screwdriver. Unplug the power-window controls.
How do you remove a door panel from a car?
Insert a screwdriver into the edge of the armrest cover and pry it off. The armrest cover may be concealing a fastening screw. Take a flathead screwdriver and wedge it into the crack at the edge of the panel. Apply gentle pressure to pop it out and remove it.
Where are the trim pieces on a door panel?
Most door panels will have small trim pieces located at the top of the panel at either the right or left side. Use a small screw driver or trim removal tool and detach (pop off) any trim pieces above the door panel.
Set the blade of the flat-head screwdriver on the inside of the interior door handle, in the seam around the square panel inside the handle. Pop off the panel using the flat-head screwdriver, then remove the two screws underneath using the Phillips-head screwdriver.
How do you remove a side mirror from a Honda Civic?
Use a flat head screwdriver to pry and loosen the mirror housing from the door trim. Then, gently tug the mirror housing up and down to pull it off. Figure 3. Remove three 8mm nuts from the mirror mount. New Honda Civic side mirror packages should come with a padding to cushion the mirror housing.
How do you replace a side mirror mount?
To replace the entire side mirror assembly, begin with removing the triangular panel and disconnecting the harness. Remove the plastic triangular panel that covers the side mirror mount and harness. Then disconnect the harness by releasing its bottom plastic locking tab, and pulling it straight out.
Unplug the power-lock switch and set the handle to the side. Set the blade of the flat-head screwdriver between the armrest and the door panel, then use the tool to pop off the armrest cover. Remove the Phillips-head screws underneath using the Phillips-head screwdriver. Unplug the power-window controls.
What do I need to remove front door panel?
The only tools needed to remove the door panel include a Phillips head screwdriver and a flathead screwdriver or an automotive panel removal tool. Then unscrew the one Phillips head screw and set it aside.