What causes a back tire to lean in?
It’s usually the result of bent suspension components, or out-of-place attachment points. Bad wheel bearings, bad bushings, loose ball joints, uneven spring compression, misadjusted ride height, uneven weight balance in the car, and even incorrectly inflated tires can all add up to give you bad camber.
Why is my tire leaning in at the top?
If the front tires are leaning in at the top, this will cause the tires to wear on the inside. This is caused by worn ball joints and control arm bushings. It could be upper or lower control arms bushings or ball joints. Then, you can wiggle the tire and watch for movement in the front end components.
Is there a way to adjust the rear tire?
At the time I said no thanks, and now I see the tire is bent and think there must be another spot to adjust the rear tire because the current control arms are straight from the factory. I researched and looks like I need what’s called a camber kit (bolt) I can adjust the rear tires 1 3/4 inch inside and out.
What causes wear on the inside of the rear tire?
Q: Rear driver side tire is slanted, causing wear on the inside. I went to have an alignment completed on the 2008 Dodge Caliber. The mechanic told me he could not align the rear tires and I needed to purchase a $400 adjustable rear lower control arm and my car did not have an adjustable lower control arm.
How often should I rotate my rear tire?
Regular rotation of the tires, every 6,000 miles, tends to minimize that effect. I would ask the shop if your camber exceeds 1 degree negative. If it does not, then the solution (to tire wear) in your circumstance is more frequent rotation of the tires.
What to do if your car alignment is not working?
Check your tire pressure. Your tires should be appropriately and evenly inflated before you proceed. Tires that are not properly inflated may actually be the cause of your performance issues, so it’s a good idea to check this first. You may not need to do anything else.
What should I do if my rear tire is leaning?
My car has 226 miles. My car has an automatic transmission. If you have one of the rear tires leaning in then you have damaged the upper control arm or spindle is bent. Have the vehicle suspension checked for damaged components and have alignment done.
At the time I said no thanks, and now I see the tire is bent and think there must be another spot to adjust the rear tire because the current control arms are straight from the factory. I researched and looks like I need what’s called a camber kit (bolt) I can adjust the rear tires 1 3/4 inch inside and out.
Regular rotation of the tires, every 6,000 miles, tends to minimize that effect. I would ask the shop if your camber exceeds 1 degree negative. If it does not, then the solution (to tire wear) in your circumstance is more frequent rotation of the tires.
Q: Rear driver side tire is slanted, causing wear on the inside. I went to have an alignment completed on the 2008 Dodge Caliber. The mechanic told me he could not align the rear tires and I needed to purchase a $400 adjustable rear lower control arm and my car did not have an adjustable lower control arm.